Turbo Selection for setup...suggestions/comments
#1
Thread Starter
Join Date: Dec 2002
Location: Bloomingdale, IL
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Selection for setup...suggestions/comments
I am to the final step of a build here at our shop, and am trying to get the best turbo for this setup:
B16 bottom end Darton Sleeves with 84mm CPs with 9.0:1 CR
stock JDM ITR head and cams with TODA valve springs
I have a Precision SC61/T3 76 trim with E compressor housing, and am planning on running 16psi daily and 20-22 at the track. My main concern is spool characteristics and at what RPM. Any help would be helpful.
Jared
B16 bottom end Darton Sleeves with 84mm CPs with 9.0:1 CR
stock JDM ITR head and cams with TODA valve springs
I have a Precision SC61/T3 76 trim with E compressor housing, and am planning on running 16psi daily and 20-22 at the track. My main concern is spool characteristics and at what RPM. Any help would be helpful.
Jared
Thread
Thread Starter
Forum
Replies
Last Post