Mr_ET

ok i'm just about to buy a t3 turbo and i would like to know if you guys know of any places where i can get a t3 super 60 used or reman that would cost 400 US and under.

i am also wondering if i should go with *.42 A/R Compressor Housing / .48 A/R Turbine Housing w/ Internal Wastegate

or more with a 0.60 a/r on the compressor.

i want full boost by 3500 to 3800 rpm

Mr_ET

bump need some help guys anyone know any good places i heard of west-coast turbo but they are temp closed and won't answer my email

nonvtecD

Go in the classifieds on here, I got my 48/60 T3 for $250. I think you're confused on what a super 60 is, they're really rare and guys that say theyre running a super 60 usually mean a 48/60 T3, look around, you'll find one. Look here http://www.homemadeturbo.com/f...589.0
any turbo you'd ever want.

Mr_ET

thx for the info but i don't feel safe buying a used turbo not know about shaftplay and how old it is. I was leaning more towards a rebuilt unit with garrett oem internals to save money and have a nice reliable unit.

i'd like to buy from them http://www.westcoast-turbo.com

but they have this frontline message and the thread on HMT says they havent been very good lately so i am looking for a similar place if anyone knows one.