turbo-crx

i had my car tuned saturday with crome pro and it ran great. today i went for a little test drive and it started to stuuder in 3rd at about 6500 rpm like its leaning out or rel rich at that certain piont. it doesnt do it in 1st or 2nd just 3rd and 4th. i dont have a wideband either to see, also i still have my stock plugs in. its b16 10psi t3/t4 basic setup. any suggestions would be nice.

OLD_HATCH

you say you have stock plugs. Did you try closing the gap to like 28-30 and/or using a colder heat range?

more info on tuning etc

turbo-crx

yea im gona put colder plugs in on break and i gapped them to .30

boostedcivicsir

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbo-crx &raquo;</TD></TR><TR><TD CLASS="quote">yea im gona put colder plugs in on break and i gapped them to .30</TD></TR></TABLE>

.3 or .030

i still think that s al little too high.

turbo-crx

YEA .030 so what should i gap them to?

boostedcivicsir

IF it is an ign breakup, go in .002 inc down til it stops, i think i was .024-.026 with a similar setup, but now im .018 but thats a completely different monster.

turbo-crx

do you have any idea what the plugs are gapped at stock?

EASY101

.044 I think?