tubular manifold Q.?
#1
tubular manifold Q.?
i have fully built boosted h22, made 393whp @16psi + 50 shots dp
my home made turbo manifold has 1.4" ID (after welding it ) and it has this designe
i was using hybrid t3/t4
and recently i bought garette t3/to4s 60-1 turbo .63 hot side
is it ok to use this turbo with the manifold i have?
my target is 450 whp @20psi without NOS
my home made turbo manifold has 1.4" ID (after welding it ) and it has this designe
i was using hybrid t3/t4
and recently i bought garette t3/to4s 60-1 turbo .63 hot side
is it ok to use this turbo with the manifold i have?
my target is 450 whp @20psi without NOS
#3
Re: tubular manifold Q.? (wantboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost »</TD></TR><TR><TD CLASS="quote">it should be ok, youre only about a tenth off on the inner diameter</TD></TR></TABLE>
whats the minimum ID size for that whp!
whats the minimum ID size for that whp!
Trending Topics
#8
Re: tubular manifold Q.? (Bailhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch »</TD></TR><TR><TD CLASS="quote">Old turbo f1 cars had long runners about 1" in diameter and they made big HP.</TD></TR></TABLE>
but i think they were V8 right so 1" doesnt effect them
but i think they were V8 right so 1" doesnt effect them
Thread
Thread Starter
Forum
Replies
Last Post
turbo*s2k
Northern California (Sales)
5
01-29-2006 04:08 PM