tial diaphragm came unseated
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2010
Location: Illinois
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
tial diaphragm came unseated
so I opened up my tial last night to see why it wouldnt open and I found that the diaphragm had came out of the top hat that its connected to..
there was no tears in it, it seemed fine, but just came out. After awhile of pulling it in different directions and messing around it seemed I got it back into the tiny gap it started in and some lite tugging it wouldnt come loose.
I ran it today and so far its working, but has anyone tried doing this before? I assume since they dont sell just the diaphram rubber part that its not supposed to come out. any ideas if it will really hold up? or maybe a better fix?
there was no tears in it, it seemed fine, but just came out. After awhile of pulling it in different directions and messing around it seemed I got it back into the tiny gap it started in and some lite tugging it wouldnt come loose.
I ran it today and so far its working, but has anyone tried doing this before? I assume since they dont sell just the diaphram rubber part that its not supposed to come out. any ideas if it will really hold up? or maybe a better fix?
Thread
Thread Starter
Forum
Replies
Last Post
b18bturbo
Forced Induction
29
04-08-2002 09:38 PM