thread pitch for mechanical autometer boost gauge
08-28-2005, 05:54 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
thread pitch for mechanical autometer boost gauge
hopefully simple question-
what is the thread pitch on the back of a mechanical ultralite autometer boost gauge?
what is the thread pitch on the back of a mechanical ultralite autometer boost gauge?
08-28-2005, 06:34 PM
#2
Join Date: Oct 2004
Location: San Jose / Stanford, CA, USA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: thread pitch for mechanical autometer boost gauge (B18EG6)
if it's not in the instructions, maybe go to the hardware store and try a bunch of fasteners? this is probably too specific a question to be answered on this forum.
08-28-2005, 07:22 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
Re: thread pitch for mechanical autometer boost gauge (b18-c-rx)
i dont have the instructions and the ones on the autometer site are a bit ambigious.
http://autometer.com/download_instruction/691F.pdf
Also, the gauge is 120 miles away from me right now
http://autometer.com/download_instruction/691F.pdf
Also, the gauge is 120 miles away from me right now
08-28-2005, 08:14 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wantboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost »</TD></TR><TR><TD CLASS="quote">its 1/8th npt</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nerdsports »</TD></TR><TR><TD CLASS="quote">its 1/4 npt but i'll have to verify</TD></TR></TABLE>
it looked a weeee too big to be 1/8 but then again im drunk. Seems to be a trend lately. School begins tomorrow
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nerdsports »</TD></TR><TR><TD CLASS="quote">its 1/4 npt but i'll have to verify</TD></TR></TABLE>
it looked a weeee too big to be 1/8 but then again im drunk. Seems to be a trend lately. School begins tomorrow
08-29-2005, 11:30 AM
#7
Honda-Tech Member
Join Date: Oct 2002
Location: Tampa
Posts: 5,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wantboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost »</TD></TR><TR><TD CLASS="quote">its 1/8th npt</TD></TR></TABLE>
yea.
i used a 1/4npt for something just the other day, it's pretty big.
has to be 1/8npt.
btw, i said 'i wanna say its 1/4npt...' not 'its 1/4npt'
if you're gonna quote me, dont change it around.
yea.
i used a 1/4npt for something just the other day, it's pretty big.
has to be 1/8npt.
btw, i said 'i wanna say its 1/4npt...' not 'its 1/4npt'
if you're gonna quote me, dont change it around.
Trending Topics
08-30-2005, 09:26 AM
#10
Honda-Tech Member
Join Date: Apr 2004
Location: Winnipeg, MB
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: (seen4ever)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by seen4ever »</TD></TR><TR><TD CLASS="quote">1/8th NPT</TD></TR></TABLE>
Def 1/8th NPT. Same as the threads on the Golden Eagle vacuum manifold
Def 1/8th NPT. Same as the threads on the Golden Eagle vacuum manifold
Thread
Thread Starter
Forum
Replies
Last Post
