Thoughts on this setup.
#1
Honda-Tech Member
Thread Starter
Thoughts on this setup.
Like the title says I would like some feedback from those thta have been there for my shortblock build up. Im aiming for somewhere in the neighborhood of 550whp and this is what Ive got lined up so far.
B18c1 block 81.5 or possibly going 83mm
CP pistons 9.0:1
Eagle H beam rods
AEBS sleeves
ACL bearing set
Stock crank
I would like to over build the bottom end because even at that hp level I still want some sort of reliability. I would like to do this right the first time and be done with it, so constructive critisim is definatly welcome.
On a seprate note, after two days of reading through the FI section about turbos, my head really hurts. Im having trouble decieding between a GT35R or a T4 setup, again pros vs cons?
Modified by Reedy at 7:31 PM 1/18/2007
B18c1 block 81.5 or possibly going 83mm
CP pistons 9.0:1
Eagle H beam rods
AEBS sleeves
ACL bearing set
Stock crank
I would like to over build the bottom end because even at that hp level I still want some sort of reliability. I would like to do this right the first time and be done with it, so constructive critisim is definatly welcome.
On a seprate note, after two days of reading through the FI section about turbos, my head really hurts. Im having trouble decieding between a GT35R or a T4 setup, again pros vs cons?
Modified by Reedy at 7:31 PM 1/18/2007
Thread
Thread Starter
Forum
Replies
Last Post
TwistedHatch
Forced Induction
14
12-02-2003 08:25 PM