please help me decide on my setup, need reliability/power, kinda long
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
need info on my shortblock decision, and full race turbo kit
basically i have few questions.........first off being, wich shortblock to go with:
the head will be a stock type r regardless
bottom end 1
ls w/ 84mm sleeves and ?? compressoin pistons
eagle rods, new honda bearings ect.
bottom end 2
gsr w/84mm sleeves and ?? compressoin pistons
eagle rods new honda bearings ect.
my next questoin is i'm going to be purchasing a full race kit here in the next month or so and i just noticed they make different stages of them now whats the difference. Wich stage do i get and what turbo should i order with it??? i was thinkin the sc 60-1?
Modified by TwistedHatch at 12:11 PM 11/30/2003
the head will be a stock type r regardless
bottom end 1
ls w/ 84mm sleeves and ?? compressoin pistons
eagle rods, new honda bearings ect.
bottom end 2
gsr w/84mm sleeves and ?? compressoin pistons
eagle rods new honda bearings ect.
my next questoin is i'm going to be purchasing a full race kit here in the next month or so and i just noticed they make different stages of them now whats the difference. Wich stage do i get and what turbo should i order with it??? i was thinkin the sc 60-1?
Modified by TwistedHatch at 12:11 PM 11/30/2003
#2
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: please help me decide on my setup, need reliability/power, kinda long (TwistedHatch)
thats alot of qustions there.
Go with GSR block rathe than LS less lines to run and does the same.
Stick with 81mm stock bore motor with soem CP,endyn,wiesco,JE psitons and pauter rods or manley. That should be pretty stout setup run around 9.5 compression. I would go either Golden Eagle Sleeved or bensons.
Go with GSR block rathe than LS less lines to run and does the same.
Stick with 81mm stock bore motor with soem CP,endyn,wiesco,JE psitons and pauter rods or manley. That should be pretty stout setup run around 9.5 compression. I would go either Golden Eagle Sleeved or bensons.
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: please help me decide on my setup, need reliability/power, kinda long (b18bturbo)
yea i know it's alot of questions, i'm going crazy tryin to decide, i do have eagle rods for the gsr already. However i was thinkin that the gsr shortblock was worth more and i could sell it to help pay for my build and i'd get a little bit more displacement with the ls, but i'm leaning towards the gsr also, just need the extra help, thanks.
#4
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: please help me decide on my setup, need reliability/power, kinda long (TwistedHatch)
the eagle rods are nice and all but with all those goodies i would step up to higher end rods such as pauter manley crower.. the eagles work but do have tendancy to stretch the rod bolt.
I would sell the eagle and the LS block should be able to get around 500 bucks for both
I would sell the eagle and the LS block should be able to get around 500 bucks for both
Trending Topics
#10
Honda-Tech Member
Re: need info on my shortblock decision, and full race turbo kit (TwistedHatch)
dont run Eagle, dont you knwo they are Junk? people break them at 200whp
#11
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: need info on my shortblock decision, and full race turbo kit (itr206)
yea i heard that, but i already have them for the gsr motor, so i'm proabably just gonna stick with em, unless i can get a good deal on some crowers
#13
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: need info on my shortblock decision, and full race turbo kit (itr206)
i noticed the wink.........but i've heard some people have had problems so i guess i was being kinda gulable....lol sorry
Thread
Thread Starter
Forum
Replies
Last Post
Honda_Fanatic
All Motor / Naturally Aspirated
16
11-07-2007 06:48 AM
eg64u
Forced Induction
9
11-01-2007 10:46 AM