Speed Pro + Turbo + Stock GSR head = Boost
#1
Honda-Tech Member
Thread Starter
Speed Pro + Turbo + Stock GSR head = Boost
Okay here is the deal.....I have run out of time on this turbo project and it looks like I will not be able to get this head fully built. The Question of the day is:
How much boost will this take? GSR motor, godzilla sleeved block, je 9:1 pistons, crower rods, all new honda bearings, YS1 cable LS big spline trans with stage 5 clutch, and Quaife, Speed Pro, 900 cc injectors, aeromotive pump and braided hoses, ........BUT STOCK GSR head. I am running a STR style intake manifold....but I will NOt have time to get the head work done as planned
How much boost on a stock GSR head? Thats the Q.
Sorry for the grief.....just tired of riding my bicycle.
Jason
How much boost will this take? GSR motor, godzilla sleeved block, je 9:1 pistons, crower rods, all new honda bearings, YS1 cable LS big spline trans with stage 5 clutch, and Quaife, Speed Pro, 900 cc injectors, aeromotive pump and braided hoses, ........BUT STOCK GSR head. I am running a STR style intake manifold....but I will NOt have time to get the head work done as planned
How much boost on a stock GSR head? Thats the Q.
Sorry for the grief.....just tired of riding my bicycle.
Jason
#3
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Speed Pro + Turbo + Stock GSR head = Boost (Blown90hatcH)
all you would need on the headis some new valve springs and some good retaineers so you can rev it past 9000rpm. Overall the headwill get you around 450hp at around 25psi
Thread
Thread Starter
Forum
Replies
Last Post