Some pictures of my turbo sol
07-09-2006, 12:21 PM
#1
Thread Starter
Join Date: Sep 2005
Location: Suburbs, MN, USA
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Some pictures of my turbo sol
Just got it finished, waiting for the tuner to come.
B18c1 block with darton sleeves bored to 84.5mm
B16 head with 3 angle valve job and skunk2 valve springs and retainers
CP Pistons
Eagle Rods
CRP manifold, dumptube, downpipe, and intercooler piping
Precision 600hp intercooler
Precision SC-61
Skunk2 intake manifold
Greddy type RS BOV
B18c1 block with darton sleeves bored to 84.5mm
B16 head with 3 angle valve job and skunk2 valve springs and retainers
CP Pistons
Eagle Rods
CRP manifold, dumptube, downpipe, and intercooler piping
Precision 600hp intercooler
Precision SC-61
Skunk2 intake manifold
Greddy type RS BOV
07-09-2006, 06:24 PM
#5
Honda-Tech Member
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93c1sol)
Jordan's gonna tune that setup real nice. Then tune my turbo GSR setup based on your map. 
J/K, good luck with the setup
J/K, good luck with the setup
Trending Topics
07-10-2006, 07:04 AM
#11
Honda-Tech Member
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93c1sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93c1sol »</TD></TR><TR><TD CLASS="quote">yes, hopefully, if i can ever get him to come over here...</TD></TR></TABLE>
He's a busy guy. Hopefully soon though.
He's a busy guy. Hopefully soon though.
07-10-2006, 11:36 AM
#15
Thread Starter
Join Date: Sep 2005
Location: Suburbs, MN, USA
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some pictures of my turbo sol (Mr.speaker)
nope, no catchcan. I liked the flat black better than that samba green. Yeah, 3 bar is mounted up on the firewall by the fuel filter. Well I plan on boosting about 22-24psi, was hoping to get 500whp, but that's going to be hard with the sc-61.
07-10-2006, 04:34 PM
#16
Re: Some pictures of my turbo sol (93c1sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93c1sol »</TD></TR><TR><TD CLASS="quote">nope, no catchcan. I liked the flat black better than that samba green. Yeah, 3 bar is mounted up on the firewall by the fuel filter. Well I plan on boosting about 22-24psi, was hoping to get 500whp, but that's going to be hard with the sc-61.</TD></TR></TABLE>
...um, through my experience, it wont...im gonna guesstimate 400whp on 17-18 lbs and 500 will come (with race gas). Nice setup btw. Street tires are the devil for the power youll be putting down...
...um, through my experience, it wont...im gonna guesstimate 400whp on 17-18 lbs and 500 will come (with race gas). Nice setup btw. Street tires are the devil for the power youll be putting down...
Thread
Thread Starter
Forum
Replies
Last Post
Jacyp7719
Forced Induction
37
12-28-2018 06:39 PM
Dammit_Dan_954
Honda Civic / Del Sol (1992 - 2000)
16
02-03-2004 08:31 PM