SMC and GM 3 Bar?
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: Knoxville, TN, US
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
SMC and GM 3 Bar?
Back in this thread (https://honda-tech.com/zerothread?id=279803) a few people were talking about using the SMC with the GM 3 bar map sensor but no one had tested it or tried it. Just wondering if anyone has tried this or if anyone has more info on this.
#3
Honda-Tech Member
Join Date: Aug 2001
Location: Miami, FL, USA
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
Re: SMC and GM 3 Bar? (supercompact)
I really wouldn't use the smc or any piggyback fuel controller on high amounts of boost. That being said I getting one for myself for my project but as soon as fund allow I will be switching to hondata.
When boosting that high it would really nice to tune to all aspects of your car (i.e. fuel, ignition, part throttle, wot) which piggy backs can't do.
P.S. Isn't the smc only calibrated to work with the stock map.
When boosting that high it would really nice to tune to all aspects of your car (i.e. fuel, ignition, part throttle, wot) which piggy backs can't do.
P.S. Isn't the smc only calibrated to work with the stock map.
#4
Honda-Tech Member
Join Date: Mar 2001
Location: Ft. Worth, TX
Posts: 3,650
Likes: 0
Received 0 Likes
on
0 Posts
Re: SMC and GM 3 Bar? (willyboyD16)
Without modification the thing isn't going to work. Fooling the MAP is ok for temporary use like this guy said, but it's a **** poor plan if you think you're going to use this method forever, whether on high or low boost.
Thread
Thread Starter
Forum
Replies
Last Post