i started installing my custom turbo kit that i built for my 2002 civic yesterday and i am confused about the tial external wastegate...where do i connect the vacuum lines that come off of the wastegate...on my previous kit, the turbo was internally wastegated, and the wastegate actuator vac line was connected to the compressor housing, but on the garret t3t04e that i have, there is no where to connect a vac line, and i am confused as what to do...please can anyone help me out here...this is all that i need to figure out so that i can put here back on the road with boost after 4 long months without it...

 

"T" off the vacuum line from the fuel pressure regulator and run the vacuum line to the side port or your wastegate, the top port on the wastegate is for a boost controller.

 

thanks soo much man, that is what i was thinking, but i wasnt to sure cause this is the first time that i have messed with external wastegate setup...thanks

 

No problem.