quick question?
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 3,789
Likes: 0
From: Single camshafting for now in, N.Y.
quick h22 turbo question?
i am building a all motor h22(for now) and i am thinking about stroking it.
i will use a f22 crank and probe ultralight rods. stock bore, 74mm throttle body and port job. stock cams and valvetrain.
if i use mahle stock compression pistons and i boost with a t60, can i run 12psi at 8500rpms redline reliablily with a good safe tune.
(i think the compression would be 11:5.1 (mahle 10:5.1 pistons)with the added stroke)
Modified by alterdcreations at 3:04 AM 10/8/2006
i will use a f22 crank and probe ultralight rods. stock bore, 74mm throttle body and port job. stock cams and valvetrain.
if i use mahle stock compression pistons and i boost with a t60, can i run 12psi at 8500rpms redline reliablily with a good safe tune.
(i think the compression would be 11:5.1 (mahle 10:5.1 pistons)with the added stroke)
Modified by alterdcreations at 3:04 AM 10/8/2006
Thread
Thread Starter
Forum
Replies
Last Post