ATS*Mark

sup guys . im thinkin that by the time i purchase all the parts seperatly , i can have the block all done and put together plus sleeves . so i think im gonna go for the exospeed race block . d16y8 , rs sleeves , stock bore , arias pistons 9.5:1 , eagle rods , micropolished crank , new bearings , new bottom end gasket kit , new seals , new oem water and oil pumps . sounds like a great deal at 2695 . only thing im going to inquire about is the warranty . i wanna make sure its a good one before i shoot this money to them .

what do you guys think .

JaeOne3345

I think you should give Wil a call, after that you shall see you are good hands. Nuff said.

menkio

i spent about 3 hours calling yesterday. good luck.

ATS*Mark

i had cash in hand , but the turnaround time is 8 weeks , cant wait that long.

ExospeedAMcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DewMota &raquo;</TD></TR><TR><TD CLASS="quote">i spent about 3 hours calling yesterday. good luck.</TD></TR></TABLE>

sorry missed your call. we try to call everyone back and keep up to date with messages left. lots of calls all day long.. sorry if we miss your call.

ExospeedAMcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">i had cash in hand , but the turnaround time is 8 weeks , cant wait that long.</TD></TR></TABLE>

We are doing our best to shorten our turnaround time. We are just so busy with many race motors that we would need a few weeks to complete FULL sleeved engine rebuilds.
We thanks Honda-tech and other supporting shops that we build race motors for, on our success. We do hope to better our turn around time by increasing the build up parts that we stock. At this time we stock $5000 in just Honda bearings alone(not including Acura bearings) to accomodate the needs of our engine building service so there is minimal down time having to order from the dealer.
We appreciate those who have turned to us for our Quality race blocks and hope to be able to help others in the future.

Wil

ATS*Mark

its all good , this is just my daily driver i cant wait that long.

Finest

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">At this time we stock $5000 in just Honda bearings alone(not including Acura bearings) </TD></TR></TABLE>

There's a difference? Hmmm, never knew that.

for some great guys!

ExospeedAMcrx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Finest &raquo;</TD></TR><TR><TD CLASS="quote">

There's a difference? Hmmm, never knew that.

for some great guys! </TD></TR></TABLE>

GSR bearings and B16 Bearings are different.

warwagon

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">its all good , this is just my daily driver i cant wait that long.</TD></TR></TABLE>

you oughta snag up a extra block like i did for 50 bones and that way down time is not a problem.......just patience

Finest

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">

GSR bearings and B16 Bearings are different.</TD></TR></TABLE>

No, I meant between Honda vs. Acura bearings.

ATS*Mark

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by warwagon &raquo;</TD></TR><TR><TD CLASS="quote">

you oughta snag up a extra block like i did for 50 bones and that way down time is not a problem.......just patience</TD></TR></TABLE>

my car is already down . thats why i need it back up asap