One-Fab strikes again.
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: (HybridKOOP)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridKOOP »</TD></TR><TR><TD CLASS="quote">
I thought about it... and I probably would have if I had the money pouring out of my eyelids like you do... but I don't, so I can't.</TD></TR></TABLE>
I've got so much money i could buy everyone manifolds, but i'm an *******, so i won't.
I thought about it... and I probably would have if I had the money pouring out of my eyelids like you do... but I don't, so I can't.</TD></TR></TABLE>
I've got so much money i could buy everyone manifolds, but i'm an *******, so i won't.
Honda-Tech Member
Joined: Sep 2003
Posts: 8,357
Likes: 5
From: CT
Re: (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">
I've got so much money i could buy everyone manifolds, but i'm an *******, so i won't. </TD></TR></TABLE>
You too.... I have that same problem.
I've got so much money i could buy everyone manifolds, but i'm an *******, so i won't.
</TD></TR></TABLE>You too.... I have that same problem.
Honda-Tech Member
Joined: Sep 2003
Posts: 8,357
Likes: 5
From: CT
Re: (HybridKOOP)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridKOOP »</TD></TR><TR><TD CLASS="quote">
<----------- I RUN A ONE-FAB TOP MOUNT THAT I GOT FOR FREE THAT WAS WELDED BY JG-FAB AND I AM TELLING THE WORLD.
Sue me!
</TD></TR></TABLE>
Lou, can you actually even call it a One-Fab manifold.... sounds like James did all the work.
<----------- I RUN A ONE-FAB TOP MOUNT THAT I GOT FOR FREE THAT WAS WELDED BY JG-FAB AND I AM TELLING THE WORLD.
Sue me!</TD></TR></TABLE>
Lou, can you actually even call it a One-Fab manifold.... sounds like James did all the work.
Honda-Tech Member
Joined: Jan 2003
Posts: 5,002
Likes: 0
From: CT, USA
Re: (HybridKOOP)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridKOOP »</TD></TR><TR><TD CLASS="quote">
<----------- I RUN A ONE-FAB TOP MOUNT THAT I GOT FOR FREE THAT WAS WELDED BY JG-FAB AND I AM TELLING THE WORLD.
Sue me!
</TD></TR></TABLE>
Contacting Lawyer as I type LOL 
<----------- I RUN A ONE-FAB TOP MOUNT THAT I GOT FOR FREE THAT WAS WELDED BY JG-FAB AND I AM TELLING THE WORLD.
Sue me!</TD></TR></TABLE>
Contacting Lawyer as I type LOL
Honda-Tech Member
Joined: Jul 2001
Posts: 6,030
Likes: 0
From: Northeast, USA
Re: (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">
Lou, can you actually even call it a One-Fab manifold.... sounds like James did all the work.</TD></TR></TABLE>
It was shipped to me from Matt, and it's got a ONE-FAB head flange on it. I'm quite happy James did everything else. It's a stout manifold that looks like would hold a tank on top of it.
Lou, can you actually even call it a One-Fab manifold.... sounds like James did all the work.</TD></TR></TABLE>
It was shipped to me from Matt, and it's got a ONE-FAB head flange on it. I'm quite happy James did everything else. It's a stout manifold that looks like would hold a tank on top of it.
Re: (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">The honda heaven hatch went down the track 1 time with that turbo, i don't think the manifold would last that long with that turbo hanging on it.</TD></TR></TABLE>
Didnt Buck run his manifold with a gt42r also, with no problems at all?
Didnt Buck run his manifold with a gt42r also, with no problems at all?
Honda-Tech Member
Joined: Aug 2005
Posts: 969
Likes: 0
From: abbotsford, bc, canada
Re: (I Have an STD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD »</TD></TR><TR><TD CLASS="quote">one case where the knockoff is much better than the original. my ssauto is holding up perfectly. yes, i braced it
oh yeah, and mine was $160 shipped </TD></TR></TABLE>
does your engine have an STD also?
oh yeah, and mine was $160 shipped
</TD></TR></TABLE>does your engine have an STD also?
Joined: Feb 2007
Posts: 1
Likes: 0
From: Bessemer City, NC, US
Re: One-Fab strikes again. (Speed PHreak)
that is the best looking manifold i've ever seen, i would pay that much for it, the cool sleak design, the holes for cooling, the old age of a 5oo mile use. It couldn't get any better then that. If you want to sell it i'll give you $1000 for it and will come and pick it up, please leave the hole in it though, i can't wait to see my exhaust temp drop from the cooling port in it.
B*a*n*n*e*d
Joined: Jul 2006
Posts: 1,668
Likes: 0
From: DFW, TX, U.S.A
Re: One-Fab strikes again. (92LSVTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92LSVTEC »</TD></TR><TR><TD CLASS="quote">H-T future smart *** here... one post, one smart *** response... </TD></TR></TABLE>
no kidding
</TD></TR></TABLE> no kidding
Member
Joined: Dec 2004
Posts: 1,852
Likes: 0
From: Houston, Texas, USA
Re: (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">PM message from HybridKOOP
(8:55 PM 2/12/2007) HybridKOOP: Well I have personally seen and dealt with 3 other manifolds of his that he welded... and they were waayy undercut. I told him that his welds used to suck. He said he used to rush the **** out of the jobs. A guy in his 50's welded my manifold. From the looks of my welds, it isn't going anywhere. Certain people obviously got better manifolds than others. Look at the HondaHaven blue hatch. They hung a 42R on it with zero problems. You shouldn't feel bad for me...
So then James (the son) is 50? That must make Sam over 80 </TD></TR></TABLE>
So is this directed to me about 3 of my manifolds you had cracking as I have never heard of it.
To my knowledge I have only had a total of 5 cracked manifolds in the past (I have been doing this 4 years now) and they were all log manifolds and 1 prototype tube (16 gauge) topmount that was when I was still learning....
Btw
I am 20 years old (4 years of welding/fabbing experience)
Sam is 46 years old (25+ years of machinest experience)
-James
(8:55 PM 2/12/2007) HybridKOOP: Well I have personally seen and dealt with 3 other manifolds of his that he welded... and they were waayy undercut. I told him that his welds used to suck. He said he used to rush the **** out of the jobs. A guy in his 50's welded my manifold. From the looks of my welds, it isn't going anywhere. Certain people obviously got better manifolds than others. Look at the HondaHaven blue hatch. They hung a 42R on it with zero problems. You shouldn't feel bad for me...
So then James (the son) is 50? That must make Sam over 80
</TD></TR></TABLE>So is this directed to me about 3 of my manifolds you had cracking as I have never heard of it.
To my knowledge I have only had a total of 5 cracked manifolds in the past (I have been doing this 4 years now) and they were all log manifolds and 1 prototype tube (16 gauge) topmount that was when I was still learning....
Btw
I am 20 years old (4 years of welding/fabbing experience)
Sam is 46 years old (25+ years of machinest experience)
-James
Honda-Tech Member
Joined: Sep 2003
Posts: 8,357
Likes: 5
From: CT
Re: (JG-Fabrications)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JG-Fabrications »</TD></TR><TR><TD CLASS="quote">
So is this directed to me about 3 of my manifolds you had cracking as I have never heard of it.
To my knowledge I have only had a total of 5 cracked manifolds in the past (I have been doing this 4 years now) and they were all log manifolds and 1 prototype tube (16 gauge) topmount that was when I was still learning....
Btw
I am 20 years old (4 years of welding/fabbing experience)
Sam is 46 years old (25+ years of machinest experience)
-James</TD></TR></TABLE>
You're all mixed up man....
This thread is about Matt. Not you. It was a conversation that we had about One-Fab.
The point of that PM quote was to show that Matt had admitted, to even his own customers, that he had rushed jobs just to fill the order. Don't read too deep into it James....
So is this directed to me about 3 of my manifolds you had cracking as I have never heard of it.
To my knowledge I have only had a total of 5 cracked manifolds in the past (I have been doing this 4 years now) and they were all log manifolds and 1 prototype tube (16 gauge) topmount that was when I was still learning....
Btw
I am 20 years old (4 years of welding/fabbing experience)
Sam is 46 years old (25+ years of machinest experience)
-James</TD></TR></TABLE>
You're all mixed up man....
This thread is about Matt. Not you. It was a conversation that we had about One-Fab.
The point of that PM quote was to show that Matt had admitted, to even his own customers, that he had rushed jobs just to fill the order. Don't read too deep into it James....
Member
Joined: Dec 2004
Posts: 1,852
Likes: 0
From: Houston, Texas, USA
Re: (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">You're all mixed up man....
This thread is about Matt. Not you. It was a conversation that we had about One-Fab.
The point of that PM quote was to show that Matt had admitted, to even his own customers, that he had rushed jobs just to fill the order. Don't read too deep into it James.... </TD></TR></TABLE>
Ok this had me a bit off thanks for clearing it up
-James
This thread is about Matt. Not you. It was a conversation that we had about One-Fab.
The point of that PM quote was to show that Matt had admitted, to even his own customers, that he had rushed jobs just to fill the order. Don't read too deep into it James....
</TD></TR></TABLE>Ok this had me a bit off thanks for clearing it up
-James
Thread
Thread Starter
Forum
Replies
Last Post
