<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wade &raquo;</TD></TR><TR><TD CLASS="quote">sick gate. any price estimate for them</TD></TR></TABLE>
still kicking that around, nothing set yet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TiAL &raquo;</TD></TR><TR><TD CLASS="quote">
still kicking that around, nothing set yet</TD></TR></TABLE>

love the new gate, i have a guess that they will be more and that's fine as they are better but they should stay under the 300 mark when they get to the end user.

p.s. why did dsport do an article on bov's and not invite you guys to play? i sent them a nasty email for ya

 

i am within a few weeks of having my race car finished. i hope these are available by that time and I dont get stuck with buying (2) 44mm gates

 

lol threadjacked. i like the new little 38mm wg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 &raquo;</TD></TR><TR><TD CLASS="quote">

p.s. why did dsport do an article on bov's and not invite you guys to play? i sent them a nasty email for ya

</TD></TR></TABLE>
i think there was a bit of miscommunication with that, i had gotten a call about a WRX BOV buyers guide, since we do not make anything that can be bolted onto the WRX I didn't send anything in....that and David has just left Dsport - he usually gives me the heads up

 

 

it doesn't use the 44mm vband flange, it has it's own 38mm vband flange

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TiAL &raquo;</TD></TR><TR><TD CLASS="quote">
yes, we do...should be out late fall if all goes well
it's the MV-S, it's replacing the current 38mm</TD></TR></TABLE>

Hey so when can we expect the CDM low-quality copy of it? Chinese-made v-bands are sexy! Seriously the new WG looks awsome, exactly what is needed - smaller, better sealing ability, and better port locations. It also looks like it will be shorter even with an adapter.

Let me suggest the price remain close to the 'old' 38mm if its going to replace it (discontinued?). I know your people will complain the extra machining costs money, but really - does it NEED all those little fins? Its a WG afterall, not a historical collector's gun.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HiProfile &raquo;</TD></TR><TR><TD CLASS="quote">

Hey so when can we expect the CDM low-quality copy of it? Chinese-made v-bands are sexy! Seriously the new WG looks awsome, exactly what is needed - smaller, better sealing ability, and better port locations. It also looks like it will be shorter even with an adapter.

Let me suggest the price remain close to the 'old' 38mm if its going to replace it (discontinued?). I know your people will complain the extra machining costs money, but really - does it NEED all those little fins? Its a WG afterall, not a historical collector's gun.</TD></TR></TABLE>

by the time china copies, we will have the next gen stuff out - we will continually make it harder for them to copy us

needs the fins because of the small size, the current long unit doesn't need them because of the distance it has from the casting

the current 38mm will be phased out over time.

 

[QUOTE=blinx9900]

joke right? they dont really make those do they?

QUOTE]

Yep. THey sure do..