i just bought a turbonetics turbokit used.....
it has :

t3/t4 turbonectics turbine it reads T-14587 dont know the specs yet
Turbonetics cast manifold / tubular manifold
all intercooler piping
big intercooler
3 inch down pipe
2 turbonetics Deltagate Wastegate
HKS SSQ BOV
oil lines
RC 450cc injectors
FPR
OBX fuel rail
maul boost controller

i need to know what else i need to make it run right to boost up to 8psi on a
b18c1 block with ITR p73 pistons/ b16a2 head
i know its high comp but im going to run it for a month or two then buy a sleeve block or just buy turbo forged piston and rods for it.....

what do i need ?
hondata
FMU
fuel pump
what else ?
please help me on this because im new to turbo....and bearly knows how to make it work.....
thanks for reading this.......

 

a 255lph fuel pump, boost gauge and good tune and you can get 14 psi on itrs. im running 10psi on my setup baisicallyt same as your with a conservative tune. Its all in the tuning.