eviltek1

Turbo ls how you like the gsc cam's?

LightningTeg

probably not. But they fit every stock 15" wheel I have seen.

Turbo-LS

iTrader: (4)

Havent installed them yet. They should do very well with the turbo im going to be using though. Between the cams and turbo I'm really hoping to be in the 600hp range on E85

LightningTeg

Shouldnt be hard to do. But you will for sure need to tune on a dyno lol

Turbo-LS

iTrader: (4)

Are you running E85 ?

eviltek1

Yea I get my block ba..ck from golden eagle in a week. Got sleeves done.. Im gonna use the 6766 .92ar w the gsc cams hoping to make 850 we will see...

LightningTeg

Yup

Turbo-LS

iTrader: (4)

Couple pictures of the Radiator installed, moved a couple things around after these pics were taken but you get the idea. Fits perfect really and takes up the whole opening should cool very well. lower hose goes right on. upper hose will fit perfect once i install the coolant filler neck from CSR

LightningTeg

Awesome. May have to look into this for a winter project. I might have to fit an elbow on for my waste gate though.

Turbo-LS

iTrader: (4)

if need be it can be mounted in front of the radiator support and still fit that FMIC with plenty of room.

allmotorek8

iTrader: (3)

Yo Justin , my bad about before man... Was having a really rough day/week and anything someone said to me I was snapping on them and just got told off a few times lmaooo. Anyways I'm a man and will always own up to when I'm wrong and I appreciate all the help me with questions and even when I dropped the car off to you for the wiring before your big move.. So I appreciate all the help bro and and the Ls-Turbo Squad.. Feeling better now and had to man up to my mistakes hope Justin aka Turbo-ls and the Ls Family accept my apology..

eviltek1

So I know I don't platonic here a lot but you guys always help me when I do... so I have. Spilling bottom mount t4 mani ...you guys think aw the right. Turbo etc. A botttom mount can make 800 Hp? Thanks

wantboost

iTrader: (2)

you don't need a top mount to make big power....

more info on the brake setup? im curious since im running 15;s

Turbo-LS

iTrader: (4)

Want boost you need type r calipers and brake rotors from a mini base model part number 120.34100. both can be purchased from rock auto for about 160 bucks and then run your pads of choice for type r integra. you can also use NSX calipers or legend calipers put on opposite sides or prelude calipers.

The mini rotors allow you to run these calipers without having to machine the mounting brackets or rotors. direct bolt up and go and you go from 10.3 to 11 brakes and clear 15" rims. Here is a link that gives you details on the setup.
http://www.team-integra.net/forum/19...gs-ls-gsr.html

got-vtec?

iTrader: (4)

Do the hoses off your car work? As far as the bends

Turbo-LS

iTrader: (4)

the bottom hose fits perfectly. the top hose just about reaches and after installing the coolant fill neck it will work perfectly. Pics will be up when i have everything done of all the components. Might also pick up the VW golf fans for this setup its a 12" and a 10" fan in a plastic shroud stock setup should move plenty of air with the shroud to keep her real cool.

This is the fan I'm thinking about running

http://www.ebay.com/itm/JETTA-99-00-...3cc093&vxp=mtr

boca

its all good bro....im sure others will agree..

good to have you back....

nealnanoHX

Will the Type R calipers fit with stock 14" Hx rims?? By mini rotors I assume you mean Lx,Dx or Hx rotors right?? I want better front brakes for when I go turbo.

wantboost

iTrader: (2)

no, mini cooper rotors...
and they wont clear anything 14"

allmotorek8

iTrader: (3)

Thanks bro, glad to be focus again!!!!

LightningTeg

Went to the track last night and ran a 12.7 @ 128 with a 2.25 60ft. Just babying it out of the hole, and its not making as much boost as it does on the street, probably 2-3 lbs less in 3rd and 4th, probably from the heat soaked IAT sensor. I need to get slicks but I wont until next year.

Oh, and the sunroof glass flew off! lol

Turbo-LS

iTrader: (4)

Automatic Weight Reduction ! lol how the hell did the glass just fly off?

LightningTeg

I have no idea man. Apparently its not uncommon. I had just passed the beams and was about to shut down and wooosh, its gone lol. Glue was still tacky and all the windows were shut so =/

crvtectim

Haha, dern, Lightning!

DA is best

iTrader: (1)

Haven't been in here awhile, lookin good turbo-ls...can't wait to turbo my DA