A little help
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: Midland, MI, USA
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
A little help (difference between t3/t4E and t3/t4B)
This is what I have.
1. A 1988 Honda CRX HF with a b16 y1 tranny with hondata and msd.
30x10x3 intercooler and HKS super seq.
This is what I want to do and need help with.
I want the car to run around 7psi of boost to be quick spool. I would like where to get a tubular stainless manifold but do not want to worry about cracking and I would like this to all fit behind the stock radiator because i just put a new one in the car.
I want to use a t3/t4 turbo I am going to buy all brand new parts just to avoid problems.
Please help with price and where to get the parts.
Is there anyone that knows the difference between the t3/t4E and the t3/t4B
Thanks
Doug
Modified by JrCRXHF at 4:58 PM 7/6/2003
1. A 1988 Honda CRX HF with a b16 y1 tranny with hondata and msd.
30x10x3 intercooler and HKS super seq.
This is what I want to do and need help with.
I want the car to run around 7psi of boost to be quick spool. I would like where to get a tubular stainless manifold but do not want to worry about cracking and I would like this to all fit behind the stock radiator because i just put a new one in the car.
I want to use a t3/t4 turbo I am going to buy all brand new parts just to avoid problems.
Please help with price and where to get the parts.
Is there anyone that knows the difference between the t3/t4E and the t3/t4B
Thanks
Doug
Modified by JrCRXHF at 4:58 PM 7/6/2003
Thread
Thread Starter
Forum
Replies
Last Post