Just got my block back from golden eagle
11-30-2006, 12:56 PM
#1
Thread Starter
Join Date: Apr 2004
Location: Sac Toe, Ca, USofA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Just got my block back from golden eagle
Im one step closer to getting my car out of the shop and on to the road. The spec's sheet from golden eagle said my block is capable of holding 70psi and 1300hp. So i pretty much can max out the turbo i have now and not have to worry about the block cracking. I cant wait to start driving my car with the turbo i have. Here is a picture of my block:
I dont know if you can tell but it was bored out just a little bit. Our cars arent true 2.3L engines, they are actually 2.25 but honda rounded it up. Anyways, ill upload some more pictures when i get it back. The builder said i might have it back as early as saturday, but it might take a little bit longer. So ill mostlikely get it back sometime next week.
I dont know if you can tell but it was bored out just a little bit. Our cars arent true 2.3L engines, they are actually 2.25 but honda rounded it up. Anyways, ill upload some more pictures when i get it back. The builder said i might have it back as early as saturday, but it might take a little bit longer. So ill mostlikely get it back sometime next week.
.... what block is this???
11-30-2006, 02:47 PM
#4
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: Just got my block back from golden eagle (Mr.Hankey)
Must be an f23. I remember your post with the Jergens bottle! Good luck with that, I may go that route one day.
11-30-2006, 06:59 PM
#7
Honda-Tech Member
Re: Just got my block back from golden eagle (Mr.Hankey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.Hankey »</TD></TR><TR><TD CLASS="quote">Im one step closer to getting my car out of the shop and on to the road. The spec's sheet from golden eagle said my block is capable of holding 70psi and 1300hp. </TD></TR></TABLE> Wow, I wonder if my GE Sleeved Z6 block could hold that, just incase, IDK, I have the mother of all boost spikes. "I was cruising at 10psi, and all of a sudden it hit 70! I don't know what happened, but when the smoke cleared I was two minutes into the past."
Trending Topics
Cant wait for the HP numbers.
12-01-2006, 05:06 AM
#9
Honda-Tech Member
Re: Just got my block back from golden eagle (dr_latino999)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dr_latino999 »</TD></TR><TR><TD CLASS="quote"> Wow, I wonder if my GE Sleeved Z6 block could hold that, just incase, IDK, I have the mother of all boost spikes. "I was cruising at 10psi, and all of a sudden it hit 70! I don't know what happened, but when the smoke cleared I was two minutes into the past."</TD></TR></TABLE>
kinda like the new zx14 commercial. lol
kinda like the new zx14 commercial. lol
Thread
Thread Starter
Forum
Replies
Last Post
K20teggg95
Acura RSX DC5 & Honda Civic EP3
4
11-04-2011 06:44 AM