Intercooler Mounting
04-11-2009, 04:37 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler Mounting
For those of you who didn't chop up your bumper support, what are you using to mount your intercoolers? I got some 1/8" thick L brackets and straight brackets thus far and I'm gonna finish mocking it all up tonight and hopefully finish tomorrow since I have to drive the car on monday. My previous intercooler was pretty small and light-duty so I used zip ties hahaha but this time I'm looking for the proper solution.
thats how it is right now, the way that I'm imagining it right now, the intercooler will be the same height as the bumper support. So with the straight brackets, create a bridge and the L brackets will be between the bumper/intercooler making a "T" bracket to keep it in there.
what do you guys think?
thats how it is right now, the way that I'm imagining it right now, the intercooler will be the same height as the bumper support. So with the straight brackets, create a bridge and the L brackets will be between the bumper/intercooler making a "T" bracket to keep it in there.
what do you guys think?
04-11-2009, 04:38 PM
#2
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Intercooler Mounting
oh and don't mind the 3">2.5", thats just temporary before the intercooler piping arrives and the new manifold goes in
Thread
Thread Starter
Forum
Replies
Last Post