Innovative MTX-L wideband issue
#1
Innovative MTX-L wideband issue
So today I go out, hop in my car to go get lunch. Turn the key to prime my fuel pump and let the wide-band heater do its thing.
After it was done, it gave me a lean reading, "22.4" and stayed stuck there. I took off anyways, got on the road and when i would get off the gas it would read really rich "7.4" and then switch back to "22.4" when i would get back on the gas.
Fuel type I'm running on this set up is pump E85. Before this, my afr gauge has worked flawlessly. Thoughts?
TIA.
After it was done, it gave me a lean reading, "22.4" and stayed stuck there. I took off anyways, got on the road and when i would get off the gas it would read really rich "7.4" and then switch back to "22.4" when i would get back on the gas.
Fuel type I'm running on this set up is pump E85. Before this, my afr gauge has worked flawlessly. Thoughts?
TIA.
Thread
Thread Starter
Forum
Replies
Last Post