LoveFab or Inline Pro ...

My choice would be LoveFab.

 

What are the HKS log manifolds like?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted92 &raquo;</TD></TR><TR><TD CLASS="quote">Today I bought my turbo ****, darton sleeved stock bore B18C1 block 9.5:1 CP pistons crower rods, ARP studs all over, and an inlinepro T3 mani. I plan on running a T3/T67, and I'm going to try and convince my cousin to let me "borrow" his full-race manifold, and try it on my car. Same car, same boost, same conditions, etc, should give a good idea of spool difference between the two.</TD></TR></TABLE>

hey can u do me a favor and try test fitting that turbo with the manifold on the block..i hear there will be quite some clearance issues with that combo/

 

I'd go with lovefab. If I wanted to only use proven products i'd buy a v8.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by E Town DSM &raquo;</TD></TR><TR><TD CLASS="quote">I actually have a SSAutochrome Manifold here for a project im working on. Anyone have any other bad luck with something like this. Just trying to watch out for anything that might come up. Its not a bad looking piece but will it hold up. Anyone else have any other opinions. Rick</TD></TR></TABLE>

yeah i have one that i had to do alot of extra work to get it not to boost creep so i would just do a love fab or a inline pro either great mani's

 

I like my Manifold.......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted92 &raquo;</TD></TR><TR><TD CLASS="quote">Today I bought my turbo ****, darton sleeved stock bore B18C1 block 9.5:1 CP pistons crower rods, ARP studs all over, and an inlinepro T3 mani. I plan on running a T3/T67, and I'm going to try and convince my cousin to let me "borrow" his full-race manifold, and try it on my car. Same car, same boost, same conditions, etc, should give a good idea of spool difference between the two.</TD></TR></TABLE>

PLEASEEEEEEEE do so

post up your results too!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbozxi &raquo;</TD></TR><TR><TD CLASS="quote"> You tell me I saw a post today where somebody made more midrange power with a lovefab mani at less boost. </TD></TR></TABLE>

where is that post?

 

I like both manifolds, but the exp. I had with cody was great in the end it didnt work out but his customer service was +++.