Helpful TIPS
#1
Thread Starter
Join Date: Sep 2004
Location: san diego, ca, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Helpful TIPS
did you guys notice this:
New GARRETT cartridges: oil passage is smaller in volume so oil feed line must be -3
Older GARRETT cartridges: -4 was fine!!! I'd still use -3 on Garretts now...to be safe!!!
All TURBONETICS cartridges: slightly bigger oil passage so oil feed line can be -4
MITSUBISI cartridges: have used -3 and -4 ... both worked out!!!
Just some experiences that is worth sharing!!!
New GARRETT cartridges: oil passage is smaller in volume so oil feed line must be -3
Older GARRETT cartridges: -4 was fine!!! I'd still use -3 on Garretts now...to be safe!!!
All TURBONETICS cartridges: slightly bigger oil passage so oil feed line can be -4
MITSUBISI cartridges: have used -3 and -4 ... both worked out!!!
Just some experiences that is worth sharing!!!
Thread
Thread Starter
Forum
Replies
Last Post