I plan on running a Precision turbo, but i cannot figure out what size i should go with. I have a b18b resleeved to 85mm 9:1 comp with a ported head, cam..and a long list of other goodies. Now i have no idea about how much air the motor will flow with its new bore and port job, nor what i will need to be able to lay my goal of 450-500whp down with. Has anyone had experience with non-vtec turbo sizing? Im totally in the dark with this one...suggestions welcome, thanks

 

IM arturbo, he'll help you out.

 

hopefully he'll read this post

 

I would reccomend a SC44 with .63 turbine.

It's perfect for your goals...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurBoTeG &raquo;</TD></TR><TR><TD CLASS="quote">hopefully he'll read this post </TD></TR></TABLE>

IMed him.

 

Thanks Stan

 

On a LS I really like the SC34 turbo which has the 57 trim compressor. On the turbine I would get the 63AR 76 trim. This is by far one of my favorite turbos of all time.

Dont be affraid to IM because I am not on HT 24/7 like I used to. Or you can call me 817-514-8756, or email arturbo98@hotmail.com I dont bite, only if your name is melanie.

art