i got a crx turbo building need some opinions give me your opinion those expert out there want to run 25 pounds the most and maybe occasional drive around town

ls block sleeved 84.5 golden eagle with je flat top pistons what compression?
knife edge cank yes or no?
i got a t3/t4 should i use that or get t60-1 internals or another turbo
ls tranny or b16
staeg5 drive shaft com axles
head is
crower turbo cams??? crower springs valve retainers
drt hand made manifold with 75mm throttle body big
accel dfi or hondata
z10 crossmember or place racing or jim fab
also what will give me more room and radiator and fans also dont know yet which ?
place racing mount or hasport
injector size going rc
aeromotive 1000 hp pump fuel system big pump and all line
2 1/5 inch exhaust
got 3 row intercooler i belive 30 inch wide is it to big or will i loss pressure its big
hks sequential blow off valve
what wastegate
and manifold

thanks everybody if you have any thing else to add
iam sure alot of ls peole wopuld like to know this stuff to thanks


[Modified by mini-cRx, 5:18 AM 11/20/2002]


[Modified by mini-cRx, 2:17 PM 11/20/2002]

 

evry one give me your opinion

 

I would get a larger exhaust.....