Had a short and my fused power sources didn't save my electronics!!!! yikes!
#1
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: BeLlInGhAm, Wa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
Had a short and my fused power sources didn't save my electronics!!!! yikes!
I lost my Profec-B, Innovate LM-1, and my voltage regulator...not to mention my guage bulbs, my headlights, my tail lights, my reverse lights, my turn signal bulbs, among other ****. So AFTER it incinerates all of my electronics it decides to blow the fuse. ******* rediculous. Its a painless wiring kit and ALL of the fuses were properly sized and installed. The "fused" IGN B+ Instrument lighting....was not fused...nor the Fused ACC power that was powering my wideband... nor the guage power B+ fused...powering my profec B.
I tested the electronics by hooking them direct to the battery with a 10 amp fuse in between...the electronics had NO draw. I took them apart and I cannot see any "burnt" IC chips, but that doesn't mean they're not fucked up. ANy suggestions? Do you think Greddy and Innovate can fix the parts? or do you think Im **** up a crick.
I tested the electronics by hooking them direct to the battery with a 10 amp fuse in between...the electronics had NO draw. I took them apart and I cannot see any "burnt" IC chips, but that doesn't mean they're not fucked up. ANy suggestions? Do you think Greddy and Innovate can fix the parts? or do you think Im **** up a crick.
Thread
Thread Starter
Forum
Replies
Last Post
Kendy
Audio / Security / Video
3
07-02-2008 11:20 AM