is this a gt35R ?????
07-15-2006, 09:51 PM
#1
ME LOVE U LONG TIME
Thread Starter
Join Date: Jul 2005
Location: Dallas, Tx
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
is this a gt35R ?????
someone selling this turbo, its water cooled(thought non-BB was just oil cooled), has a .60ar compressor with a .48 exhaust housing , he thinks its a gt35e which those turbo's aren't watercooled
http://hondamarketplace.com/zerothread?id=1668084
Modified by tannerLSt at 12:08 AM 7/16/2006
http://hondamarketplace.com/zerothread?id=1668084
Modified by tannerLSt at 12:08 AM 7/16/2006
07-15-2006, 11:07 PM
#3
ME LOVE U LONG TIME
Thread Starter
Join Date: Jul 2005
Location: Dallas, Tx
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
i know the guy pretty well, and he's local. just think he might not know he has a ball bearing turbo and thats why its so cheap. plus he traded full coilover suspension and $200 for it so its a slight posibility
07-16-2006, 07:48 AM
#6
Honda-Tech Member
Re: is this a gt35R ????? (tannerLSt)
not a 35r or a 30r , I would be very questionable about that turbo , being that it has the larger than standard 5 bolt downpipe discharge , looks like a e-bay turbo
07-16-2006, 01:35 PM
#7
ME LOVE U LONG TIME
Thread Starter
Join Date: Jul 2005
Location: Dallas, Tx
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
its says garrett on exhaust housing, also says m-4 pt-3 and .48......
compressor housing says M10 , bn , has a A like the airResearch and a 1200-4 on the back of compressor, only has .60 on front of compressor
compressor housing says M10 , bn , has a A like the airResearch and a 1200-4 on the back of compressor, only has .60 on front of compressor
Trending Topics
07-18-2006, 11:15 AM
#9
i ♥ my honda
Global Mod
Global Mod
Re: is this a gt35R ????? (tannerLSt)
Where in that post does it say GT35R???
It IS a standard 5 bolt true garret .48 turbine.
The compressor housing is definitely NOT Garrett. Looks like Precision to me.
As for the CHRA, its most likely BB since it does have the watter jackets. If its true Garrett then there will be a plate riveted to the CHRA. The back plates are not Garrett or Precision so if I had to guess, Id say ebay...
That looks like a standard t3/t04e with a BB center, not a GT35.
It IS a standard 5 bolt true garret .48 turbine.
The compressor housing is definitely NOT Garrett. Looks like Precision to me.
As for the CHRA, its most likely BB since it does have the watter jackets. If its true Garrett then there will be a plate riveted to the CHRA. The back plates are not Garrett or Precision so if I had to guess, Id say ebay...
That looks like a standard t3/t04e with a BB center, not a GT35.
Thread
Thread Starter
Forum
Replies
Last Post