first time using nitrous...need help
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: in the streets
Posts: 2,725
Likes: 0
Received 0 Likes
on
0 Posts
first time using nitrous...need help
i have:
rc 310cc injectors
walbro 255lph fuel pump
adj fpr
msd ignition kit
will i need any of these when using nitrous? i'm going to use the msd for
sure, but do i need the other parts? i'm going to running a zex kit with a 50
shot on a jdm gsr motor.
also, what should the fuel pressure be raised to? i've seen one guy have his at 60psi at idle, isn't that too high?
thanks
rc 310cc injectors
walbro 255lph fuel pump
adj fpr
msd ignition kit
will i need any of these when using nitrous? i'm going to use the msd for
sure, but do i need the other parts? i'm going to running a zex kit with a 50
shot on a jdm gsr motor.
also, what should the fuel pressure be raised to? i've seen one guy have his at 60psi at idle, isn't that too high?
thanks
#2
Re: first time using nitrous...need help (hondaeg8)
I have ran a 55 wet nx shot on my d16z6 for five bottles, basic mods, intake, apexi N1, straight pipe, etc. Just dont backfire (spray below 3000RPM), it puts be back in the seat
Thread
Thread Starter
Forum
Replies
Last Post