First dyno with Turbo LOOK
05-17-2003, 03:24 PM
#1
Thread Starter
Join Date: Sep 2002
Location: SURREY, United Kingdom, UK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
First dyno with Turbo LOOK
First dyno power run with my turbo kit on and look what i got 
It's putting out 102BHP and 188 ld ft.
They said it could be under fueling.
Modified by NOSED_CRX_VTEC at 1:01 AM 5/18/2003
It's putting out 102BHP and 188 ld ft.
They said it could be under fueling.
Modified by NOSED_CRX_VTEC at 1:01 AM 5/18/2003
05-17-2003, 04:00 PM
#4
Thread Starter
Join Date: Sep 2002
Location: SURREY, United Kingdom, UK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: First dyno with Turbo LOOK (RAWB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RAWB »</TD></TR><TR><TD CLASS="quote">What's your fuel setup? </TD></TR></TABLE>
I'm using the Vafc Hack with 450cc DSM inj and the stock fuel pump at 40psi
I'm going to finish putting on my vortec fmu in a min and i'll see if that does anything good.
Unless anybody can come up with any beter ideas
05-17-2003, 04:05 PM
#6
Thread Starter
Join Date: Sep 2002
Location: SURREY, United Kingdom, UK
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: First dyno with Turbo LOOK (PureTeg420)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PureTeg420 »</TD></TR><TR><TD CLASS="quote">are you running the stock cat? Looks to me like you have a major restriction in the exhaust</TD></TR></TABLE>
Yes i am but would it still misfire badly if it was the exhaust restricting it?
Yes i am but would it still misfire badly if it was the exhaust restricting it?
Thread
Thread Starter
Forum
Replies
Last Post