Finally made it to the dark side...... Single cam slammer y0
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: City of Angels
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Finally made it to the dark side...... Single cam slammer y0
I finally boosted this little puppy. Due to my computer not letting me make big posts, i gotta get to the facts.
- 1g dsm bov
- custom intercooler piping
- 6" johnny race car front mount
- .42 a/r .48 a/r T3 aiResearch turbo
- Dsm 450 cc injectors w/ resistor box
- Rev hard A/C manifold
- Chipped P28 w/ uberdata
- 2.25 --> 2.5 " downpipe ---> 2.25 inch piping --> es oval
- tial 38 mm wastegate w/ 7psi spring
- custom dump tube
- 1g dsm bov
- custom intercooler piping
- 6" johnny race car front mount
- .42 a/r .48 a/r T3 aiResearch turbo
- Dsm 450 cc injectors w/ resistor box
- Rev hard A/C manifold
- Chipped P28 w/ uberdata
- 2.25 --> 2.5 " downpipe ---> 2.25 inch piping --> es oval
- tial 38 mm wastegate w/ 7psi spring
- custom dump tube
#2
Honda-Tech Member
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: Finally made it to the dark side...... Single cam slammer y0 (0ptimus Prime)
decent setup, i ran something very similar on my sohc vtec. it was night and day over bolt ons. keep us up on your setup and any dyno/track times if they come in the future
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: City of Angels
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally made it to the dark side...... Single cam slammer y0 (blackeg)
thanx man, i would write a whole lot more but this lousy computer only lets me make small posts, or none at all.
Anyway, right now i like it, my downpipe is just rattling against my a/c compressor, but i can fix that by grinding down the side of the a/c with a dremmel. Other than that, once i get a proper downpipe flange, and 2.5 inch piping, i hope it'll be super quick.
I'm running 5 lbs right now, but hope to get it to 8 - 9 safely.
Anyway, right now i like it, my downpipe is just rattling against my a/c compressor, but i can fix that by grinding down the side of the a/c with a dremmel. Other than that, once i get a proper downpipe flange, and 2.5 inch piping, i hope it'll be super quick.
I'm running 5 lbs right now, but hope to get it to 8 - 9 safely.
Trending Topics
#16
Join Date: Jul 2004
Location: lovely SocaL, CA, united of the states
Posts: 3,073
Likes: 0
Received 0 Likes
on
0 Posts
Re: Finally made it to the dark side...... Single cam slammer y0 (Boltz)
whoopie way to go Ulysses, we should go cruising sometimes, but wait till im back on the road again
hey thats the same turbo mani i got too! nice stuff man
hey thats the same turbo mani i got too! nice stuff man
Thread
Thread Starter
Forum
Replies
Last Post