Experiences on the Exedy race clutch
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: Mechanicsville VA
Posts: 2,318
Likes: 0
Received 0 Likes
on
0 Posts
Experiences on the Exedy race clutch
I bought this clutch a few months ago. Couldnt go wrong I paid 1100 shipped with the fly wheel and everything. I was just wondering if anyone was using this clutch also and how it feels
#4
Honda-Tech Member
Re: Experiences on the Exedy race clutch (BoostedEG6)
looks like a 6 puck disk......or i could be wrong........sprung or un-sprung?
either way it should hold some good power.........exedy make nice clutches.....
either way it should hold some good power.........exedy make nice clutches.....
#5
Junior Member
Join Date: Apr 2002
Location: X 9, NJ, USA
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Well I have the twin disc and as of right now im driving on it with 1500 miles. Im not really putting it under alot of pressure considering i've not been tuned, but I will tell you that the pedal feels close to stock. Hopefully you will get the same effect with the single disc.
Trending Topics
#8
Re: (EG1.8cT68)
I am running the same clutch on the sr20 in my 240. grabs quite nicely and the pedal is only slightly stiffer than a Spec stage 3. overall I give it 2 thumbs up. sorry I can not give you an apples to apples comparison. I suspect you will like this clutch very much though.
#9
Re: (EG1.8cT68)
My boy has one on his Del Sol (with a GSR Turbo Swap) and he said its smooth as hell. I'll also have one on my Turbo'd Ls in about 3 days. Exedy = High Quality.
#10
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: Mechanicsville VA
Posts: 2,318
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Ls InTeGrA RaCeR)
yeah I will keep everyone up to date when everything goes togeather. I am hoping this should hold togeather with my set up. I am running the following
Full-Race Top Mount manifold
Full-Race T3/T67 high output turbo
CP 9.8:1 pistons
Eagle rods
GSR block
81.5mm bore
B16 head with ITR cams
victor X manifold
Autronic EMS
and some misc **** I have forgotten since I am here in Iraq
Full-Race Top Mount manifold
Full-Race T3/T67 high output turbo
CP 9.8:1 pistons
Eagle rods
GSR block
81.5mm bore
B16 head with ITR cams
victor X manifold
Autronic EMS
and some misc **** I have forgotten since I am here in Iraq
Thread
Thread Starter
Forum
Replies
Last Post