Exospeed sleeves
10-17-2004, 03:53 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: South Florida
Posts: 3,711
Likes: 0
Received 0 Likes
on
0 Posts
Exospeed sleeves
anyone using them with success? they are only $290 for a set. Cant beat that at all!
http://www.exospeed.com/engine/exospeedsleeves.htm
http://www.exospeed.com/engine/exospeedsleeves.htm
10-17-2004, 06:23 PM
#4
Honda-Tech Member
Join Date: Jan 2004
Location: Lompoc, Ca., USA
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exospeed sleeves (yanta)
Where the hell did you hear that rumor?...
Exospeed is still going strong, they had a slight set back for a little while but they are back on track now that they have their new shop...
As for exospeed sleves, Exospeed built my engine, sleves and all and we are pushing 600+whp with no problems. The tuning is very conservative for what the motor can handle...
Contact Wil at Exospeedam@yahoo.com
Exospeed is still going strong, they had a slight set back for a little while but they are back on track now that they have their new shop...
As for exospeed sleves, Exospeed built my engine, sleves and all and we are pushing 600+whp with no problems. The tuning is very conservative for what the motor can handle...
Contact Wil at Exospeedam@yahoo.com
10-19-2004, 10:59 AM
#5
Member
Join Date: Oct 2003
Location: WeHo, CA, USA
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exospeed sleeves (Group Tenacity)
haha, thanks for clarifying!
Exospeed is still in business and we didn't switch owners. Yanta, you are probably confused since RS Machines has changed ownership. Exospeed used RS for sleeving, but we are still under the same ownership. We are currently moving into our new shop in beautiful Glendale, CA. Wil and Roy are putting down some carpet in the office today so Wil's new baby girl can crawl around without getting her head stuck in a piston ring or anything like that.
Right now, we are expecting our sleeving to be on a 2-3 day turnaround. If you are having trouble getting in touch with Wil at 818-355-6156 or exospeedam@yahoo.com, please email me at exospeedcs@gmail.com or 951-329-5932.
Thanks, Dylan
Exospeed is still in business and we didn't switch owners. Yanta, you are probably confused since RS Machines has changed ownership. Exospeed used RS for sleeving, but we are still under the same ownership. We are currently moving into our new shop in beautiful Glendale, CA. Wil and Roy are putting down some carpet in the office today so Wil's new baby girl can crawl around without getting her head stuck in a piston ring or anything like that.
Right now, we are expecting our sleeving to be on a 2-3 day turnaround. If you are having trouble getting in touch with Wil at 818-355-6156 or exospeedam@yahoo.com, please email me at exospeedcs@gmail.com or 951-329-5932.
Thanks, Dylan
Thread
Thread Starter
Forum
Replies
Last Post
