eagle rods hp handle?
03-19-2006, 03:32 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: ARLINGTON, TX, USA
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
eagle rods hp handle?
i was wondering what's the highest horsepower someone has made with eagle rods (3/8 rod bolts). Is 600hp possible?
03-19-2006, 04:21 PM
#3
Join Date: May 2003
Location: rotterdam, the Netherlands
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Re: eagle rods hp handle? (boostfeen)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostfeen »</TD></TR><TR><TD CLASS="quote">i would use those rods as a door stop, or a paper weight.</TD></TR></TABLE>
That's some great info man
I use them on a built H22 i'll be on a dyno in a week or 2(if i don;t forget i'll post the dyno sheet here). Going to boost to 25 psi and i think they will hold the power no problem.
I think high rev is more of a factor with rod failure. I'm only revving to 8000rpm instead of 9500 to 10000 people are doing now on those high power big turbo setups on b16,b18's.
Don;t know max power on them but 600 can be made. My oppinion
.
That's some great info man
I use them on a built H22 i'll be on a dyno in a week or 2(if i don;t forget i'll post the dyno sheet here). Going to boost to 25 psi and i think they will hold the power no problem.
I think high rev is more of a factor with rod failure. I'm only revving to 8000rpm instead of 9500 to 10000 people are doing now on those high power big turbo setups on b16,b18's.
Don;t know max power on them but 600 can be made. My oppinion
.
Thread
Thread Starter
Forum
Replies
Last Post
