Those who committed to my groubbuy please stay with me. I have made the order and Im responsible for those who havent sent their payments in yet. Ive worked hard putting this together for everyone and I would really be upset if you went ahead and purchased from this reseller above me.
As always, if you guys have any questions please PM, IM, or email me.

Dan

 

If you have made an order with 93lsivic keep it. I agreed not to sell to anyone on his list. I did not mean to steal his customers but was just looking out for the people who missed this opportunity.

 

wow i was about to say THREAD JACKER LOL... for looking out for 93lscivic

 

I'm interested in the cutout, but I'm hoping to know about the loudness of it. Running a 3" dp w/cutout, is it overpoweingly loud, or just intimidatingly?? I don't like too much attention. Is there a downloadable sound clip anywhere?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Revlimit &raquo;</TD></TR><TR><TD CLASS="quote">I'm interested in the cutout, but I'm hoping to know about the loudness of it. Running a 3" dp w/cutout, is it overpoweingly loud, or just intimidatingly?? I don't like too much attention. Is there a downloadable sound clip anywhere?</TD></TR></TABLE>

thats the whole point of the cutout. you run it through a stock/quiet exhaust and then open the cutout when you want free flowing/pretty loud action.

BOOYASHACKA! RE5PECT.

 

If you guys are looking for someone to make your downpipes with the cutout..

Check out https://honda-tech.com/zerothread?id=491681

 

i know im late but if you get stuck with someone not paying for a:
QTEC25CP Quick Time Electric Cutout and Flowtech Cutout 2 1/2" Package $169.99

let me kno im down to buy it from you im me if you need more info

 

has anyone gotten there e-cutout units yet?

 

Emails have been sent to the gb guys.

 

i must have missed the email then. send me another.

 

I got my e-mail.

 

I havent gotten anything yet

 

is it too late to join?

 

bump

 

If you asking if its too late to join, then yes. We may stock these in the near future though, but we are undecided at this time due to difficulty in availability today and probably in the future.

 

We purchased extra 3" cutouts with the Flowtech option. If you interested PM me and we can get them to you, but not at the gb price.

Dan

 

93LSivic, you have IM about the problem.

 

Question about the useage of E-cutouts: Since this allows the turbo to spool up much faster and thus more boost lower in the rpms - does this require re-tunning? Wont it screw up your tuned fuel map? This may have been asked before but I was too lazy to read thro all 4 pages of this thread

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Muckman &raquo;</TD></TR><TR><TD CLASS="quote">Question about the useage of E-cutouts: Since this allows the turbo to spool up much faster and thus more boost lower in the rpms - does this require re-tunning? Wont it screw up your tuned fuel map? This may have been asked before but I was too lazy to read thro all 4 pages of this thread </TD></TR></TABLE>

bumpski

 

bump

 

anyone know what the shaft is made out of? i tryed tackin the lil bolts in so they dont fall out, and a bunch of poo gas shot out of the metal. is it shizzy pot metal? i doubt its ti, due to the price. or is it some kinda thermal coating? what ever it is, that shizza stunk up the shop.

 

probably just galvanized...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Muckman &raquo;</TD></TR><TR><TD CLASS="quote">Question about the useage of E-cutouts: Since this allows the turbo to spool up much faster and thus more boost lower in the rpms - does this require re-tunning? Wont it screw up your tuned fuel map? This may have been asked before but I was too lazy to read thro all 4 pages of this thread </TD></TR></TABLE>

yes someone please answer.. how will this work with hondata regarding tuning?

 

this is what you do...make sure you tune the car with the cutout open and thats it...just dont rag on the car when you have the cutout closed... This is what i have been doing for two years and my car runs great

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CM-R &raquo;</TD></TR><TR><TD CLASS="quote">this is what you do...make sure you tune the car with the cutout open and thats it...just dont rag on the car when you have the cutout closed...</TD></TR></TABLE>

ditto

also, since this gb is over, there's another gb going on for the mccord ecutouts:
https://honda-tech.com/zerothread?id=568844 i think there's only like 3 spots left tho!