Custom Downpipes!
#1
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Custom Downpipes!
Like the topic says, custom DP's with flexpipe. $175 + shipping. Got questions? Ask away!
<FONT COLOR="red">These units are all custom. We can make your usual sizes: 2", 2.25," 3", etc. Let me know if you have any special requests. If the flange is available, we can make the piping for it. If you need longer flex pipe, we can get it. Let us know what you're looking for. </FONT>
AIM: IntegrVTEC or spoonlsvtec
(We're not always around, if you don't get a response... leave your email and we'll email you when we get back.)
Modified by 94TealGSR at 11:57 PM 4/30/2003
Modified by 94TealGSR at 11:58 PM 4/30/2003
<FONT COLOR="red">These units are all custom. We can make your usual sizes: 2", 2.25," 3", etc. Let me know if you have any special requests. If the flange is available, we can make the piping for it. If you need longer flex pipe, we can get it. Let us know what you're looking for. </FONT>
AIM: IntegrVTEC or spoonlsvtec
(We're not always around, if you don't get a response... leave your email and we'll email you when we get back.)
Modified by 94TealGSR at 11:57 PM 4/30/2003
Modified by 94TealGSR at 11:58 PM 4/30/2003
#2
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Downpipes! (94TealGSR)
Less than two hours, and I got 9 PM's! I had to wait 5 minutes jsut for them all to load!
Do me a favor, if you have a question.. ask it here if you can.
Do me a favor, if you have a question.. ask it here if you can.
#3
Re: Custom Downpipes! (94TealGSR)
do you make a downpipe for greddy turbo's that start from the turbo itself?
Im looking into getting that tiny elbow replaced that comes from the turbo.. let me know. Also will we be able to maintain the AC with these downpipes?
Thanks!
Im looking into getting that tiny elbow replaced that comes from the turbo.. let me know. Also will we be able to maintain the AC with these downpipes?
Thanks!
Trending Topics
#8
Join Date: Dec 2001
Location: St. Petersburg, Fl, usa
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Birdman.)
yes i can make a 2 piece downpipe, i can make anything as long as i have something to model it from. Now im using my integra ls and my brothers integra gsr. Pm me or 94tealgsr for pricing.
#9
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboDC4)
For anyone that sent me a PM but didn't get a response yet...
Please, post your question here. I'm getting duplicate questions and it's hard to keep track of who got an answer and who didn't. If you post here rather than PM'ing me then one answer can serve many people.
Thx
Please, post your question here. I'm getting duplicate questions and it's hard to keep track of who got an answer and who didn't. If you post here rather than PM'ing me then one answer can serve many people.
Thx
#11
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: (94TealGSR)
ok, i got drag gen 4 manni, and a 4-bolt t3 60-1. i need a 3" or 2.5"to 3" flare. 93 prelude h22.
i also need 2.5" intercooler piping, how can you make this when it all depends on how things are mounted.
i need this stuff asap, like yesterday.
thanks,
Vinny
i also need 2.5" intercooler piping, how can you make this when it all depends on how things are mounted.
i need this stuff asap, like yesterday.
thanks,
Vinny
#12
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: (fastludeh22)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastludeh22 »</TD></TR><TR><TD CLASS="quote">ok, i got drag gen 4 manni, and a 4-bolt t3 60-1. i need a 3" or 2.5"to 3" flare. 93 prelude h22.
i also need 2.5" intercooler piping, how can you make this when it all depends on how things are mounted.
i need this stuff asap, like yesterday.
thanks,
Vinny</TD></TR></TABLE>
Fitment is not quite as big of a problem as you would think. For example.. length of the intercooler doesnt matter because we send out the intercooler piping with the pipes made so that they are way to long for most any intercooler. That way when you get it you can bust out your hack saw and cut it perfectly to fit your specific intercooler.
i also need 2.5" intercooler piping, how can you make this when it all depends on how things are mounted.
i need this stuff asap, like yesterday.
thanks,
Vinny</TD></TR></TABLE>
Fitment is not quite as big of a problem as you would think. For example.. length of the intercooler doesnt matter because we send out the intercooler piping with the pipes made so that they are way to long for most any intercooler. That way when you get it you can bust out your hack saw and cut it perfectly to fit your specific intercooler.
#16
Honda-Tech Member
Re: (wickedxboi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wickedxboi »</TD></TR><TR><TD CLASS="quote">very tempting.....even if i get your 3' dp..... my 2.25 exhaust isnt going to help much.</TD></TR></TABLE>
hehe, thas why you go with my mandrel bend exhaust check sig
bump for these guys. ive spoke with them and they seem to be ready for everyone....
hehe, thas why you go with my mandrel bend exhaust check sig
bump for these guys. ive spoke with them and they seem to be ready for everyone....
#18
Re: Custom Downpipes! (94TealGSR)
hmm, do you need a model for my 2000 Civic SI with a TDO5-18G Greddy Turbo.
I need the downpipe to go from the turbo all the way to the beginning of where the catalytic converter starts.
Also i am looking for a 2.5" stainless steel complete downpipe as well.
Could i get pricing and availability? Also I am looking into preserving the AC if at all possible.
Thanks again!
Modified by see2k at 11:42 AM 5/1/2003
I need the downpipe to go from the turbo all the way to the beginning of where the catalytic converter starts.
Also i am looking for a 2.5" stainless steel complete downpipe as well.
Could i get pricing and availability? Also I am looking into preserving the AC if at all possible.
Thanks again!
Modified by see2k at 11:42 AM 5/1/2003
#20
Junior Member
Join Date: Mar 2002
Location: Bay Area, CA
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Downpipes! (94TealGSR)
hey,
i need a 2.5" -> 3.0" downpipe for a '95 GSR with a 5 bolt t3/t4 turbo on a drag manifold. i also need to have it extended so it will replace the cat. could you give me prices for both steel and stainless steel? thanks!
i need a 2.5" -> 3.0" downpipe for a '95 GSR with a 5 bolt t3/t4 turbo on a drag manifold. i also need to have it extended so it will replace the cat. could you give me prices for both steel and stainless steel? thanks!
#21
Join Date: Dec 2001
Location: St. Petersburg, Fl, usa
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Re: Custom Downpipes! (phase12gsr)
ok Ive responded to most people through pm. If someone would be willing to send us theire greddy manifold and turbo we could make a downpipe to model it with. Unless that happens or i find someone local then i really cant make those. We could work a deal out with someone willing to do this though. My girlfriend has a 98 prelude, if i made piping for that would it fit a 93 lude?
#23
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2000
Location: East Coast
Posts: 3,583
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1.8T_EG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1.8T_EG »</TD></TR><TR><TD CLASS="quote">... custom downpipes huh?... any chance of getting something similar to the setup found here?... lemme know... if the price is right, i would definitely be interested... thanks...</TD></TR></TABLE>
bump for i would throw down for this asap as well
bump for i would throw down for this asap as well
#24
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Slick_GS-R)
Throw some offers for the cutout setups. I'm not really interested in providing the cutouts, so if you guys wanna send em to us we can weld everything up.
IM us some offers (AIM: IntegrVTEC or spoonlsvtec). As I recall someone was going to sell them for $400? (With the cutout, I assume..)
What size piping do you guys want to go to the cat?
IM us some offers (AIM: IntegrVTEC or spoonlsvtec). As I recall someone was going to sell them for $400? (With the cutout, I assume..)
What size piping do you guys want to go to the cat?
#25
Thread Starter
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sagaprelude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sagaprelude »</TD></TR><TR><TD CLASS="quote">getting a greddy kit soon for my 98 prelude, anyway for a 2.5inch dp all the way from the turbo to the cat?</TD></TR></TABLE>
IM spoonlsvtec on AIM.. he knows mroe about the prelude stuff than I do.
IM spoonlsvtec on AIM.. he knows mroe about the prelude stuff than I do.