... e-cutout / ecutout...
Joined: Mar 2003
Posts: 661
Likes: 0
From: usa
Re: ... e-cutout / ecutout... (yimmy)
I want to run one w/my greddy dp(2in) and stock dx exh.(1 1/2in), and I want one in between. Which one do I need? also if you don't get the flowtech do you just get the valve so you can't hook it to the cat back? let me know then Iam in 
[Modified by 94dxt, 10:54 PM 4/7/2003]
[Modified by 94dxt, 10:54 PM 4/7/2003]
Honda-Tech Member
Joined: Feb 2002
Posts: 2,937
Likes: 0
From: 648 at 8,500
Re: ... e-cutout / ecutout... (int3gra)
So the only difference between the one with the flowtech cutout and the one without the cutout is the "Y" correct? If you get the one without the flowtech cutout, all you get is the cutout and no "Y" for the e-cutout to be mounted to? And the price will be 10% off of the $169 and the $139 right?
-Ryan
-Ryan
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: ... e-cutout / ecutout... (@irborne)
To everyone asking if the gb is still on:
Yes, the gb is still on, Im going to make the cutoff date Tuesday, April 22.
If you are "in" for the buy, then everyone please direct questions to me in PM. I will need email addresses, AIM if available, and of course your hondatech name if you decided to email me instead of PM me.
My email is turbocivx@comcast.net and my AIM is dansivic.
Thanks!
Yes, the gb is still on, Im going to make the cutoff date Tuesday, April 22.
If you are "in" for the buy, then everyone please direct questions to me in PM. I will need email addresses, AIM if available, and of course your hondatech name if you decided to email me instead of PM me.
My email is turbocivx@comcast.net and my AIM is dansivic.
Thanks!
Honda-Tech Member
Joined: Mar 2002
Posts: 311
Likes: 0
From: FL
the first one posted (power plate) only says tested up to 1200* F. turbo motors sometimes get higher temps than that. has this one or the qtech proven higher?
i know my friend with a typhoon was running one 6 months ago and he claims its still working fine w/o problems and he runs higher than 1200*F at a few times. any thoughts?
i know my friend with a typhoon was running one 6 months ago and he claims its still working fine w/o problems and he runs higher than 1200*F at a few times. any thoughts?
Junior Member
Joined: Jan 2001
Posts: 638
Likes: 0
From: NOR CAL, US
Re: (full boost)
I had the QTEC on my turbo GSR for about 1 year and 6 months....It still works as great as i first put the thing on...My setup is my 2.5 inch drag dp with QTEC welded on..then my stock cat and stock exhaust system.. I made about 273.5 whp and 204.5 tq from it on my completely stock 00 gsr motor....I highly recommend the QTEC...Ive been keeping it a secret around my area for a while now...
Honda-Tech Member
Joined: Aug 2002
Posts: 3,910
Likes: 0
From: Somewhere in, CT, USA
Re: (CM-R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CM-R »</TD></TR><TR><TD CLASS="quote">I had the QTEC on my turbo GSR for about 1 year and 6 months....It still works as great as i first put the thing on...My setup is my 2.5 inch drag dp with QTEC welded on..then my stock cat and stock exhaust system...I highly recommend the QTEC...Ive been keeping it a secret around my area for a while now </TD></TR></TABLE>
mind posting some pics of your setup? I was thinking the exact same thing
mind posting some pics of your setup? I was thinking the exact same thing
Honda-Tech Member
Joined: Apr 2002
Posts: 982
Likes: 0
From: irvine, ca, USA
Re: (B18Flip)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18Flip »</TD></TR><TR><TD CLASS="quote">
mind posting some pics of your setup? I was thinking the exact same thing </TD></TR></TABLE>
yea that would be nice to see another set up!
mind posting some pics of your setup? I was thinking the exact same thing
</TD></TR></TABLE>yea that would be nice to see another set up!
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: ... e-cutout / ecutout... (1.8T_EG)
17 and counting. Actually more since Im waiting on a couple of poeple with contact information to come in.
Im gonna be sending out emails tonight for all the gb participants. If you want to get on the gb let me know!
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: ... e-cutout / ecutout... (93LSivic)
Emails have been sent out to participants.
Please take note. The groupbuy date has been changed so that I can get these out to the buyers quicker.
If anyone else wants in then please act now.
If your on the gb list on page 2 and you did not receive an email today then please let me know!
Dan
Please take note. The groupbuy date has been changed so that I can get these out to the buyers quicker.
If anyone else wants in then please act now.
If your on the gb list on page 2 and you did not receive an email today then please let me know!
Dan
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: ... e-cutout / ecutout... (93LSivic)
More emails sent to participants. If you didnt get an email then reply here.
Also you must reply in order for us to make the order.
Its still not to late to get in the buy if anyone is interested--you have til friday.
Dan
Also you must reply in order for us to make the order.
Its still not to late to get in the buy if anyone is interested--you have til friday.
Dan
Joined: Sep 2002
Posts: 167
Likes: 0
From: draper, UT, USA
Re: ... e-cutout / ecutout... (itr206)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 »</TD></TR><TR><TD CLASS="quote">i just got the summit one for $26.95, hehehe , im not that lazy where i cant pull off 3 wingnuts. i dont plan to run open on the street only the track , i dotn need any more attention
looks like a cool toy though. im just curious hwo the seal , i knwo the cable ones are shitty and they break and not seal good </TD></TR></TABLE>
where did you find this on summit racing?
looks like a cool toy though. im just curious hwo the seal , i knwo the cable ones are shitty and they break and not seal good </TD></TR></TABLE>
where did you find this on summit racing?
Honda-Tech Member
Joined: Jul 2001
Posts: 5,608
Likes: 1
From: All around, De/Pa
Re: ... e-cutout / ecutout... (94dxt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94dxt »</TD></TR><TR><TD CLASS="quote">any idea when we will recieve them?</TD></TR></TABLE>
You guys cant wait can you
I know neither can I 
Patience is a virtue!
You guys cant wait can you
I know neither can I Patience is a virtue!
Joined: Apr 2003
Posts: 255
Likes: 0
From: Seattle, wa, USA
Re: ... e-cutout / ecutout... (93LSivic)
Hey whats up i'm new thats why i'm so late but i like to order one
today is cutoff so does that make me still in e-mail me at azn88888888@hotmail.com
today is cutoff so does that make me still in e-mail me at azn88888888@hotmail.com
Joined: Oct 2002
Posts: 199
Likes: 0
Re: ... e-cutout / ecutout... (JuuKe_EM)
I have a question, I'm currently running b16a NA with a 2.5 inch pipe. I wanna switch to a smaller 2 inch pipe and preferably use a stock muffler. Now if i wanted to get the e cutout, which one would I get? The smallest diameter for the y pipe is 2.5", would this be adaptable to a 2 inch one?
