Just got done tuning a LS/VTEC setup

84mm AEBS sleeved block
9:1 JE
Manley rods
STOCK B16 head (only springs and retainers, stock B16 cams)
Precision PT70 custom turbo
3" DP
cheap crappy manifold (cracked too)

the 435whp run was on pump gas at 15 psi. 569whp run was on C16 at 23 psi







customer is gonna get some type R cams and a top mount manifold. 600+whp will come soon!

SAE #'s are 551whp & 326 ft-lbs and 421whp & 265ft-lbs on pump

 

sick numbers man!

 

good job, any video?

 

someone was video taping the run.... but not from a digital camera.


oh yea, car was tuned on UBERDATA. gonna switch over to CROME-PRO once i get my new laptop

 

anyone have any before and after dynos with the addition of Type R cams?

 

Looks like it was boost creeping pretty bad on the race gas runs, huh?

 

Looks like the boost may have decided to no longer become vertically challenged on the race gas to me too...

 

lol yea. boost was build n pretty slow with that setup. it was creeping too. the kid needs a new manifold. he has a weak ramhorn design manifold with a 38mm wastegate neck with a 44mm wastegate welded onto it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted k20 &raquo;</TD></TR><TR><TD CLASS="quote">he has a weak ramhorn design manifold with a 38mm wastegate neck with a 44mm wastegate welded onto it </TD></TR></TABLE>

WTF?!?!?!?!?!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedEG6 &raquo;</TD></TR><TR><TD CLASS="quote">

WTF?!?!?!?!?! </TD></TR></TABLE>

yea thats what i was say n! the car had a 11 lb spring in the gate and was see n 15 -16 psi.

once we get a new manifold and some cams, better numbers should come out

 

on numbers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18sihatch &raquo;</TD></TR><TR><TD CLASS="quote"> on numbers</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by my si is bluer than yours &raquo;</TD></TR><TR><TD CLASS="quote">damn kerry ur gettin pretty good. nice #'s.</TD></TR></TABLE>

thanks bro. i hear ur teg is boosted too?????

 

Sleeves, precision pt70... and a cracked manifold? Isn't that like wearing a tuxido and slipping dirty sandals on??

 

very nice!

 

My goodness

 

What turbine wheel and housing was used?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HiProfile &raquo;</TD></TR><TR><TD CLASS="quote">Sleeves, precision pt70... and a cracked manifold? Isn't that like wearing a tuxido and slipping dirty sandals on?? </TD></TR></TABLE>


the kid ran out of cash so he couldnt get a manifold as yet. in a month he should have a good manifold and cams.