Drag B-Series Turbo manifold
11-23-2004, 07:15 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: CA, Canada
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Drag B-Series Turbo manifold
There's a guy local that is letting one of these go for cheap it's only been used a month hes being a full-race (lucky bastard) so I'm thinking of buying it. It's a Drag Gen3 manifold w/ t3 flange as well as a wastegate flange. It's going on my GS-R hatch hopefully.
11-23-2004, 09:07 PM
#4
Honda-Tech Member
Join Date: Sep 2002
Location: hittin corners so hard you can taste my rims..
Posts: 5,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drag B-Series Turbo manifold (EM2Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EM2Civic »</TD></TR><TR><TD CLASS="quote">so I'm thinking of buying it. </TD></TR></TABLE>
... and... your a homo!
... and... your a homo!
11-24-2004, 02:06 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: CA, Canada
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
It's only sorta temporary i'm not going for more than 10psi for track and like 6-7psi daily. At the end of next summer i'll start my bottom end build and buy a better manifold.
Trending Topics
11-28-2004, 06:22 PM
#10
Join Date: Jan 2004
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Re: (14bcoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 14bcoupe »</TD></TR><TR><TD CLASS="quote">i personally never liked the placement of the wastegate on these manifolds, since its only on one runner its just asking for boost creep.</TD></TR></TABLE>
I've been running one all summer and I was begging for boost creep. The shitty Delta wg always opens at 5psi and I was begging for more, but never once did it creeps with a t3/t4.
I've been running one all summer and I was begging for boost creep. The shitty Delta wg always opens at 5psi and I was begging for more, but never once did it creeps with a t3/t4.
11-28-2004, 07:18 PM
#14
Junior Member
Join Date: May 2004
Location: Montreal, Canada
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drag B-Series Turbo manifold (Built B16A)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Built B16A »</TD></TR><TR><TD CLASS="quote">... and... your a homo!</TD></TR></TABLE>
Best post ever...NOT!
Best post ever...NOT!
11-28-2004, 07:21 PM
#15
Thread
Thread Starter
Forum
Replies
Last Post
xtremeness101
Classifieds: Forced Induction
3
07-24-2004 11:32 AM
B18Flip
Classifieds: Forced Induction
10
09-04-2003 12:34 PM
