dohc vtec guys- what kind of timing do you run when not in vtec???
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
dohc vtec guys- what kind of timing do you run when not in vtec???
my lsvtec feels like a dog when in boost but not in vtec. im currently running a street tune on uberdata and have about .8 degrees out per psi set for my nonvtec timing. im curious to see what kind of timing other people are running, to help give me an idea.
additional info about my setup- 81mm lsvtec, uberdata, t3 60-1 on just about 10 psi. my current a/f starts high 12s and low psi and holds solid low 11's to redline from 4800 when i hit full boost. my vtec xover is currently at 5000, but im gonna tune that more on the dyno in the upcomming weeks
additional info about my setup- 81mm lsvtec, uberdata, t3 60-1 on just about 10 psi. my current a/f starts high 12s and low psi and holds solid low 11's to redline from 4800 when i hit full boost. my vtec xover is currently at 5000, but im gonna tune that more on the dyno in the upcomming weeks
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: dohc vtec guys- what kind of timing do you run when not in vtec??? (raene)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by raene »</TD></TR><TR><TD CLASS="quote">Use some det cans and crank it up until it pings or you feel a loss of power </TD></TR></TABLE>
hahaha it might just come to that!
the oe gsr map only ran like 23.75* at 0", and im pulling the retard off that, its only like 16 total at 10-11 psi...
hahaha it might just come to that!
the oe gsr map only ran like 23.75* at 0", and im pulling the retard off that, its only like 16 total at 10-11 psi...
Thread
Thread Starter
Forum
Replies
Last Post
jetlude
Forced Induction
5
07-08-2007 10:00 AM