uneekcrx

so i turned on my car after working on it all day...everything was cool except the egt guage was reading below the zero...i was like WTF..............so i took the probe out of the manifold and the little tip was bent over on the side like it had been hit by something....****** bullshit....so i tried to bend it a little bit towards where it was supposed to be and it cracked right off....i'm so pissed off right now....i resealed the whole turbo today(gaskets and stuff) in the search for finding my boost problem and then this **** happens....is there anywhere that i can get another egt probe for an autometer guage besides having to order it?

Smashback

Try your local speed shops.

PrecisionH23a

this is why i mounted my probe on my downpipe and not my manifold... broken probe = f'd up turbo. you should be able to get ones from optauto.com or any company that caries the brand egt that you have.

TurbothisLS

is it still accurate on teh downpipe ?
autometer recommends this over the manifold for turbo cars...

DA666

its a 300* degree difference between the correct placment which is the number 1 cylinder runnner as opposed to the dp

i would also like to know where to get a universal probe instead of autometers $100 probe........?

thanks.

TurbothisLS

why does autometer recommend installing the probe on the dp on fi cars ?

uneekcrx

i was on summitracings website

http://store.summitracing.com/produc...earchtype=ecat

but which one do i need i think the 1/4in street probe is the right one but it's only $46 but the 3/16in one is $105