I have the CP's sc7001 for a b16, they are 81.5mm Can I use these in a type R block with a b16 head, and will the compression still be 9.0:1???

thanks in advance, CP lists two different part numbers but the specs are the same, I just want to know if its possible.

 

Using this piston in a b16 will give you 9-1 but using it in a b18 would give you about 9.7-1

 

9.7:1 is still very boostable specially CP pistons. quality forged slugs.

 

isn't the skirts on the b16 and b18 different?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DrVtec99 &raquo;</TD></TR><TR><TD CLASS="quote">isn't the skirts on the b16 and b18 different?</TD></TR></TABLE>

bump for good question?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DrVtec99 &raquo;</TD></TR><TR><TD CLASS="quote">isn't the skirts on the b16 and b18 different?</TD></TR></TABLE>
no

 

haha?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DrVtec99 &raquo;</TD></TR><TR><TD CLASS="quote">isn't the skirts on the b16 and b18 different?</TD></TR></TABLE>they are all the same