is this the correct mcmaster p/n for oil feed line?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: West Palm, FL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
is this the correct mcmaster p/n for oil feed line?
I'm looking to replace my oil line. I know that a 1/4" flare fitting is too big. Would this be the correct p/n for the line? I got the feed line kit used, so I dont' really where it came from.
4552K436
(Same as 4552K431)
PTFE Braided Hose W/Type 304 SS Braid SS Swivel Fem X Fem Fitting, 36" L, 3/16" ID, 3000 Psi
Anyone help?
Thanks.
4552K436
(Same as 4552K431)
PTFE Braided Hose W/Type 304 SS Braid SS Swivel Fem X Fem Fitting, 36" L, 3/16" ID, 3000 Psi
Anyone help?
Thanks.
#2
Junior Member
Re: is this the correct mcmaster p/n for oil feed line? (scartail)
Your best bet in my opinion would be to find someone selling the NOS 3ft or 4ft -3AN feed line. These can be found already assembled for around $20 - $30 I think. Can't remember exactly what I paid.
Edit:
http://store.yahoo.com/racings....html - searched my mail, that's where I ordered mine. Any other fittings you need, talk to Stan (flamenco-t)
Modified by dennis at 5:55 PM 12/7/2004
Edit:
http://store.yahoo.com/racings....html - searched my mail, that's where I ordered mine. Any other fittings you need, talk to Stan (flamenco-t)
Modified by dennis at 5:55 PM 12/7/2004
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: West Palm, FL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this the correct mcmaster p/n for oil feed line? (dennis)
I'm ordering a bunch of other items, and want to lump it onto the pile. I'll look around to see if anyone is selling this line and find out. Hopefully.
Thread
Thread Starter
Forum
Replies
Last Post
tegmech
Forced Induction
1
12-30-2003 08:13 PM