Clocking an Ihi turbo
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Farmington, ny, USA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Clocking an Ihi turbo
Ive searched this to death but they all seem to pertain to garrett turbos.
I Recently had my turbo rebuilt and upgraded.
I need to clock it because it is 180* out.( Drain up top)
Now i know all the bolts are out is there any kind of a clip im missing or anything, any special trick other than a Vice and a long pry bar? How gental is gental?
Ive pb blasted it to ****, let it sit and tried the vice a pry bar method and it will not budge.
Help
I Recently had my turbo rebuilt and upgraded.
I need to clock it because it is 180* out.( Drain up top)
Now i know all the bolts are out is there any kind of a clip im missing or anything, any special trick other than a Vice and a long pry bar? How gental is gental?
Ive pb blasted it to ****, let it sit and tried the vice a pry bar method and it will not budge.
Help
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Farmington, ny, USA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clocking an Ihi turbo (ccivic)
So a rubber mallett huh?
So I would clamp the intake side into the vice and hit the exhaust side with the mallett?
So I would clamp the intake side into the vice and hit the exhaust side with the mallett?
Thread
Thread Starter
Forum
Replies
Last Post
kamakaze1
Forced Induction
2
07-18-2006 12:16 PM
Scott - 93HB Si
Forced Induction
11
06-02-2003 10:38 PM