CEL Problem
#1
Honda-Tech Member
Thread Starter
iTrader: (11)
Join Date: Oct 2010
Location: Boise, ID
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
CEL Problem
Hey guys,
This doesn't necessarily pertain to the turbo part of my car, but you guys know about pretty much everything lol.
The situation is yesterday I was driving around and I noticed that every time I hit a larger bump in the road the car would kind of die off. Just today, I got a CEL that was solid. I've been reading about dead ECUs and everything, but my car still runs well as long as I don't floor it or go over any large bumps. I checked the 3 motor grounds and they're all tight. I've been running this ECu for awhile now and it has the Hondata S300 in it. I also have an OBD2 to OBD1 jumper harness. I tried pushing all the pins in more, but it didn't seem to help.
Any suggestions?
This doesn't necessarily pertain to the turbo part of my car, but you guys know about pretty much everything lol.
The situation is yesterday I was driving around and I noticed that every time I hit a larger bump in the road the car would kind of die off. Just today, I got a CEL that was solid. I've been reading about dead ECUs and everything, but my car still runs well as long as I don't floor it or go over any large bumps. I checked the 3 motor grounds and they're all tight. I've been running this ECu for awhile now and it has the Hondata S300 in it. I also have an OBD2 to OBD1 jumper harness. I tried pushing all the pins in more, but it didn't seem to help.
Any suggestions?
#2
Honda-Tech Member
Thread Starter
iTrader: (11)
Join Date: Oct 2010
Location: Boise, ID
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Re: CEL Problem
I've been running this turbo setup for about a month now with no issues until today. It seems like something is just loose and shorting out, but I don't know what it could be.
Last edited by ryguy2588; 07-30-2011 at 08:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post