big bov

Thread Tools
 
Search this Thread
 
Old Sep 2, 2002 | 10:01 PM
  #1  
Lamchop0000's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2002
Posts: 1,632
Likes: 0
From: ca
Default big bov

.

Last edited by Lamchop0000; Jul 30, 2019 at 07:04 PM.
Reply
Old Sep 3, 2002 | 01:58 AM
  #2  
rjardy's Avatar
Honda-Tech Member
 
Joined: Jan 2002
Posts: 4,426
Likes: 0
From: Prescott Arizona
Default Re: big bov (lamchop0000)

chances are that you will not build any boost without a load (neutral)

Rob
Reply
Old Sep 3, 2002 | 04:45 AM
  #3  
mitsuman's Avatar
Honda-Tech Member
iTrader: (1)
 
Joined: Jul 2002
Posts: 5,755
Likes: 0
From: Charlotte, NC
Default Re: big bov (rjardy)

no you will not stall. i have reved my engine many times in neutral building a few pounds of boost just enough to blow off and i have never had any problems. and jes for the record even if its not a huge bov doesnt mean it doesnt wurk as good.
Reply
Old Sep 3, 2002 | 05:12 AM
  #4  
internet ay's Avatar
Honda-Tech Member
 
Joined: Nov 2001
Posts: 971
Likes: 0
From: pa, usa
Default Re: big bov (mitsuman)

the reason your friends gsx, stalled when he revved it is because his car uses a mass air sensor, which meters air right before the turbo, so when the bov releases air into the atmosphere, this air is already metered. so i beleive that this creates a rich condition for a split second and that is why it stalled, oh and im not sure but i think that the stock bov on those cars suck in air at idle, i could be wrong though.
Reply
Old Sep 3, 2002 | 10:17 AM
  #5  
Lamchop0000's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2002
Posts: 1,632
Likes: 0
From: ca
Default Re: big bov (lamchop0000)

.

Last edited by Lamchop0000; Jul 30, 2019 at 07:05 PM.
Reply
Old Sep 9, 2002 | 11:18 AM
  #6  
Lamchop0000's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2002
Posts: 1,632
Likes: 0
From: ca
Default Re: big bov (lamchop0000)

.

Last edited by Lamchop0000; Jul 30, 2019 at 07:06 PM.
Reply
Old Sep 10, 2002 | 11:33 PM
  #7  
Lamchop0000's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2002
Posts: 1,632
Likes: 0
From: ca
Default Re: big bov (lamchop0000)

^
Reply
Old Sep 11, 2002 | 01:06 AM
  #8  
_Endless_'s Avatar
Honda-Tech Member
 
Joined: Jul 2002
Posts: 775
Likes: 0
Default Re: big bov (lamchop0000)

try reading this to know why your friend's gsx stalls http://www.alltrac.net/tuning/bovfaq.html

hth
Reply
Old Sep 11, 2002 | 07:34 AM
  #9  
GraphiteAccord's Avatar
B*a*n*n*e*d
 
Joined: Aug 2001
Posts: 2,966
Likes: 0
From: Todays date is, UK
Default Re: big bov (lamchop0000)

i know stalling sounds pretty intense. but a friend of mine has a 1g eclipse gsx and he removed the bov return pipe that goes back into the turbo inlet. so the bov blows into the atmosphere, and when we he rev'd it up to 5k rpm and just let go and the bov went hisss... the rpm drops and stalls. and when he put it back its normal again.
a honda won't do this, only DSM's. The map for some reason is looking for the air to vent back into the intake for some reason, and when it doesn't see it, it freaks out. This was explained to me by a DSM guy a couple months ago, but i wasn't really paying attention, though i remember he said some dsm's did it, and don't didn't. I forgot the varibles though....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mike93boost
Forced Induction
1
May 29, 2006 07:39 PM
teddy_dc2
Forced Induction
1
Oct 6, 2005 07:24 PM
desert eagle
Forced Induction
5
Jan 20, 2005 07:10 PM
iwhichisme
Forced Induction
1
Jun 14, 2004 08:05 PM
dunkd
Forced Induction
5
Apr 25, 2004 02:35 PM




All times are GMT -8. The time now is 02:32 AM.