Please let me know what color bearings I need. I will give Honda a call later today if no one replies. Thanks!

Mains - B3 C2 B2 C2 B3
Rods - 3C 3C 3C 3C

Just to keep this in F/I I will post a picture, lol

http://f1.pg.photos.yahoo.com/...0.jpg

 

Mains - green, green, yellow, green, green
Rods - brown, brown, brown, brown

 

Thanks Dinuguan

 

No problem

 

You do understand that if you have switched to aftermarket rods, the color system does NOT work for the rods anymore. If you switched cranks from the original, same thing. You should plastigage to make sure.

 

If you are running aftermarket rods go with acl bearings, got mine from Earl and they have never been a problem. A lot of people use them. When I tried to get bearings the green ones from honda were on backorder, I dont know what the situation is now, but the acl's work great

 

dude when my engine was assembled over a year again a handful of the bearings were backordered. Mostly green and brown they need to get their **** together.

 

That color code **** just confuses me, I just plastigauge each one and get whatever's needed.

 

That will be done. Thanks Earl