B20B turbo start up
Thread Starter
Joined: Aug 2003
Posts: 30
Likes: 0
From: windsor, Ontario, canada
B20B turbo start up
Okay i'm gona start my car soon and i have a few Questions
-Dish washer ss lines for coolent line to turbo Okay?
-Plug the fitting from the turbo compressor housing and use the intake manifold vacume for the wastegate Okay?
-open down pipe okay to drive 15 min to muffler shop or will it melt the rad fan?
-what oil presure should i have going to the turbo
-What should water temp be at in a turbo setup 190 F?
-I have a five way vacume tee #1 is the vacume source #2 is FPR #3 is BOV #4 is wastegate #5 is boost gauge is all this stuff okay from the one FPR vacume source?
-Dish washer ss lines for coolent line to turbo Okay?
-Plug the fitting from the turbo compressor housing and use the intake manifold vacume for the wastegate Okay?
-open down pipe okay to drive 15 min to muffler shop or will it melt the rad fan?
-what oil presure should i have going to the turbo
-What should water temp be at in a turbo setup 190 F?
-I have a five way vacume tee #1 is the vacume source #2 is FPR #3 is BOV #4 is wastegate #5 is boost gauge is all this stuff okay from the one FPR vacume source?
Thread
Thread Starter
Forum
Replies
Last Post
postman
Forced Induction
8
Apr 24, 2008 02:41 PM
