b16 turbo over fueling HELP!!
just joined site dont no if any one could help. i have 1990 b16 crx vtec just turbo'd got map sensor, fmu. standard ecu runs but over fueling heavly and does'nt reach full nrev range ive also got vafc any ideas on wot ecu in need and any thing i can do till got money for new ecu. any help would be great
1) Put stock map sensor back on and throw out FMU. Stock map sensor should eleviate running rich. Drive car but dont go into boost until you get a tune. Better yet dont drive it till tune.
2) Leave map sensor on but remove FMU. John at phearable.net can hook you up with an ECU and base map to use to drive around with till you get a tune. Especially if its your only vehicle.
2) Leave map sensor on but remove FMU. John at phearable.net can hook you up with an ECU and base map to use to drive around with till you get a tune. Especially if its your only vehicle.
Thread
Thread Starter
Forum
Replies
Last Post
hotimportcrx
Forced Induction
25
Jul 14, 2005 02:06 PM
fredtoast
Forced Induction
8
Jul 16, 2003 06:49 PM




