ATTN: Cody @ Lovefab - SST questions, maybe someone here knows aswell...
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: Toronto, Ontario, Canada
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
ATTN: Cody @ Lovefab - SST questions, maybe someone here knows aswell...
Going to bolt-up my new turbo to my Lovefab SST manifold. Wondering if you or someone else can tell me what size/pitch/thread bolts I need for the outlet flange on the manifold.
Thanks in advance H-T!
Thanks in advance H-T!
#2
Junior Member
Join Date: Jun 2003
Location: Jacksonville, Fl, USA
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Re: ATTN: Cody @ Lovefab - SST questions, maybe someone here knows aswell... (B16A1-EF9)
https://honda-tech.com/zerothread?id=373905#bottom
10mm x 1.25 [30mm] ( length of the bolt)
same as drag, revhard, and inline pro
10mm x 1.25 [30mm] ( length of the bolt)
same as drag, revhard, and inline pro
#4
Honda-Tech Member
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: ATTN: Cody @ Lovefab - SST questions, maybe someone here knows aswell... (B16A1-EF9)
Oops, missed this one by a couple of days. I have an FAQ on the website that explains the situation.
Basically, 10mmX1.5 OR 3.8X24TPI. All of the earlier manifolds used the 3/8, so hopefully you dont force the 10mm in there, and wonder why its not coming out as easily(been there, done that for some customers).
Basically, 10mmX1.5 OR 3.8X24TPI. All of the earlier manifolds used the 3/8, so hopefully you dont force the 10mm in there, and wonder why its not coming out as easily(been there, done that for some customers).
Thread
Thread Starter
Forum
Replies
Last Post
Apex i ITR
Forced Induction
3
02-07-2003 07:46 AM